CommScope to instruct on 40-, 100-GbE data center technologies at Ethernet Technology Summit - Connector Specifier

CommScope to instruct on 40-, 100-GbE data center technologies at Ethernet Technology Summit


Feb 8, 2012

CommScope announced that its technical marketing manager for enterprise communications infrastructure solutions,Yinglin (Frank) Yang, will speak about 40 and 100 Gigabit Ethernet (GbE) technology during the upcoming Ethernet Technology Summit (Feb. 21 - 23) in San Jose, CA.

Yang will teach a course during the Summit's morning tutorial entitled, 40/100GbE is Alive and Well on Wednesday, February 22. Yang’s course, titled Cabling for Next Generation BASE-T, will start with an overview of 10GBASE-T and 40/100GbE technologies. The course will discuss some research results on balanced twisted pair copper cabling for Ethernet speeds beyond 10Gb/s. The presentation will further discuss key considerations, such as cabling bandwidth, reach, connector and performance for 40GBASE-T. The course will conclude by enumerating ways industry should work together to help with end-user adoption of 10GBASE-T technologies and beyond. The morning tutorial will begin at 8:30 a.m. PST.

Related Story:  Zone distribution cabling model ideal for data centers, CommScope says

Yang will conclude the day by participating a final tutorial entitled, Ethernet and Virtualization (Data Centers Track). Collaborating with Gautam Chanda from Cisco Systems, Yang will co-present on a course entitled, Utilize 40GbE and 100GbE Networking Technology to Build Virtualized Data Centers. This course will discuss when and how 40GbE will become an accepted part of the IT landscape. It will focus on how CIOs and IT managers will handle high-bandwidth applications using server virtualization, cloud computing and fabric consolidation within the data center. The course will also address the move to 40GbE and 100GbE, how it may change the network architecture in virtualized data centers, and what IT managers can do now to prepare to migrate to the new standards and network architecture. This tutorial will begin at 3:10 p.m. PST.

Yang will also lead and organize the afternoon session of the Summit's Emerging Technology Track tutorial at 3:10 p.m. PST. For more on the Ethernet Technology Summit, visit http://www.ethernetsummit.com/.

More CommScope Coverage


Editor's Picks

Incapable connectors shut down Large Hadron Collider

Amphenol: Bulking up via buyout

NASA unveils deep space MPCV exploration craft; Lockheed Martin responds

As UAV market surges, connectors adapt

NHTSA pressures Ford into mass F-150 truck recall on airbag wiring danger

Esterline acquiring Souriau for $715 million

Report: Single trader holds half of world's copper


Top Blog Posts

Inside Foxconn's deadly iPad factory after the blast

Fireproof electronic connectors: design challenges

Connector industry giants saw banner 2010 sales growth

Tearing down Apple's Thunderbolt cable

Massive solar tower will rank among world's tallest buildings


Most Popular Articles
Top Articles for 2011

Boeing exec admits 787 outsourcing strategy backfired

Foxconn staggering after full year net loss of $200M+

The Motley Fool' pits Amphenol vs. Molex

ITT issues military-aerospace connector sourcebook

SATA-IO unveils portable consumer storage specification

Raytheon locks in LaBarge for cruise missiles' wiring harnesses post-Libya bombing

Union group denies Verizon fiber lines vandalized

Northrop Grumman seeks to replace copper-based aircraft wire, cabling

Driving wiring harness design data toward manufacturing


Latest Community Discussions

Video: Fire breaks out at Foxconn's Shandong plant
Bystander video shows the scene of a fire breaking out on September 27 at Foxconn's Yantai Shandong plant where Sony consumer electronics products are reportedly assembled.

Testing the Boeing 787 Dreamliner's in-flight entertainment systems
Boeing video shows what was involved in testing (i.e. "trying to break") the in-flight entertainment, connectivity, and power systems on board the new 787 Dreamliner.

Belden FiberExpress Brilliance LC Connector Installation
Video details installation of a 900-micron OM3/OM4 prepped fiber into an LC connector.

Visit the Community >


Receive Free E-mail Newsletters from Interconnection World


You may select more than one newsletter  
Interconnection World
Connector Specifier
Wire & Harness Specifier

 
Name  
 
Email  
 
Country  
 
 
 

 
Sponsor Information

Interconnection World Content Categories:

Wire & Harness
 Data & Telecom
Standards Distributors
Design & Test Applications
Business Wire News
Video