Clamp Meters
 |
The 720 Series Clamp Meters are designed to provide full-function, auto-ranging digital AC/DC current measurement up to 1,000 A. These tools are suitable for the job site and can reportedly withstand drops of 5". They feature a large-digit backlit display, audible continuity, diode test, DCA push-button zero, and relative and data hold. Built-in safety features include 600 V overload protection on all ranges. Ideal Industries Inc., Sycamore, Ill.
Liquid Dispenser
 |
The Auto-Tube System is designed to dispense any liquid, paste, oil or grease directly from a "toothpaste-type" tube or cartridge. The tube is screwed into a special adapter and placed inside the retaining cartridge assembly. Users drop the tube filled with liquid directly into the retainer, attach a tip and are ready to dispense. Dispensing can be controlled by either a foot valve or a timed dispenser for a more controlled shot. Three sizes are available for dispensing from a 100 g tube, a 200 g tube or a 1/10 gallon container. I&J Fisnar Inc., Fair Lawn, N.J.
Tool Kit
 |
The TK-700 34-piece telecommunications tool kit is said to be suitable for the installation, troubleshooting, servicing and repairing of telecommunications equipment in both office and field environments. It reportedly includes many specialty telecommunications tools made to Bell specifications. The kit features a soft, padded leather case with zipper, measures 12 X 17 X 2" and weighs 2 lb. Jonard Industries Corp., Tuckahoe, N.Y.
Optical Power Meter
 |
The 522B-HP high-density optical power meter is said to be capable of performing measurements of high levels of optical power up to 27 dBm. The meter is calibrated traceable to NIST with 980, 1,310, 1,480, 1,550 and 1,625 nm. The range of 80 dB reportedly makes this hand-held instrument suitable for qualification and testing of communication systems, optical amplifiers and other high-output devices. A backlit LCD enables users to view measured optical power levels and the selectable calibration wavelength. Rifocs Corp., Camarillo, Calif.
Epoxy
 |
Appli-tec 5400 is a high-strength, 5 minute epoxy available in two package options, including dual-pac, static-mixer cartridges. This material reportedly has a Shore-D hardness of 71 and lap-shear strength of 3,000 psi when cured at 25°C. The epoxy is a free-flowing liquid that can be composed in various paste forms, and it can serve as a gap filler, supplied in a 1:1 mix ratio. appli-tec Inc., Haverhill, Mass.
Flexible Flat Cable Welding System
 |
The Ultraweld Shuttle is a semiautomatic, ultrasonic welding system designed specifically for terminating the leads of flexible flat cables. It produces multiple welds using a programmable step-and-repeat indexing system. This 40 kHz system is said to produce high-quality, low-resistance welds with process control. American Technology Inc. (AmTech), Shelton, Conn.
Epoxy Potting Compound
 |
Epoxy potting compound 3862 is a heat-curable potting material that offers low thermal expansion, wetting and flow capabilities, heat-transfer capabilities, and electrical properties. It cures fully when exposed to 100°C temperatures for 2 hours or to 180°C temperatures for 1 hour. Said to be resistant to weather, water, gases, vapors, petroleum lubricants, and many mild acids and alkalis, the product is suitable for harsh end-use applications such as automotive environments; it is suitable for Military Class H applications. Loctite Corp., Rocky Hill, Conn.
Front Panels
 |
Pac-2000 front panels are designed for EMI shielding and mechanical performance. They are constructed with continuous elastomeric, conductive foam gasketing along the edges rather than the more common construction employing metal teeth. This design offers EMI shielding while reportedly eliminating the problems arising from adjacent metal surfaces. The panels are offered in widths of 0.8" (4 HP), 1.2" (6 HP) and 1.6" (8 HP), and in heights of 3U, 6U and 9U. A variety of handles is available. Hybricon Corp., Ayer, Mass.
Test System
The LIV (Light-intensity-Current-Voltage) Test System is designed for testing laser-diode modules used in fiber optic telecommunications applications. A variety of test and measurement capabilities can be configured based on the instruments selected for the test system. Standard is a Model 2400 Digital SourceMeter, Model 2510 TEC SourceMeter and two Model 6517A Electrometers. The system is IEEE-488- and RS-232-programmable. Keithley Instruments Inc., Cleveland, Ohio
Adhesive/Casting Compound
 |
Duralco 4700 Adhesive and Casting Compound is said to provide 600°F service with the convenience of conventional epoxy processing. Users can mix the resin and hardener and cure at 250°F for high electrical resistance; low moisture absorption; high temperature stability; high bond strength; low shrinkage; and chemical, solvent and radiation resistance. It is suitable for sealing electrical connections, bonding, potting and repairing in automotive, aerospace, nuclear, chemical production and lab applications. Cotronics Corp., Brooklyn, N.Y.
RF Test Socket
 |
This high-frequency test socket is designed for QFP and other device packages with 0.4 mm lead pitch. It is said to offer reliability and long life. The contacts provide 0.01 nH self-inductance per contact. The socket exhibits 10.0 GHz frequency response with 1.0 dB signal loss, and can be used at temperature ranges from -55° to 170°C. Lead counts of up to 208 in manual and automatic versions are available. Aries Electronics Inc., Frenchtown, N.J.
PTFE Tubing
Series DUT nonshrinkable, thin-wall PTFE tubing and Series SH620 heat-shrinkable, thin-wall PTFE tubing is said to be made from virgin PTFE and feature its mechanical properties, such as low coefficient of friction, light weight and high temperature resistance. The DUT Series offers extruded PTFE tubing with walls as thin as 0.0015" and IDs ranging from 0.0020 to 0.3250". The SH620 Series offers fully recovered walls to 0.0015" and recovered IDs as small as 0.0080". Daburn Electronics & Cable Corp., Northvale, N.J.
Conformal Coating
 |
Conformal coating 9-984-B is black, solvent-free and light curing, and is said to cure faster than most clear UV coatings. The black color hides the board, components and circuitry. Hard dry surfaces are available, even under moderate-intensity lights. It is applied through precision dispensing systems, and is reportedly abrasion-resistant and has excellent electrical properties. Applications include a variety of circuit boards and glass-filled epoxy, metal and ceramic surfaces. Dymax Corp., Torrington, Conn.
Microscope Stage
The Model V277 microscope stage is for the inspection of LC and MU small form-factor connectors. Because both of these connectors can be field-terminated, a microscope is necessary to inspect the ferrule ends after polishing to ensure proper finish. The microscope also allows checking connectors for dirt or damage. The V100 microscope is said to magnify 100X and allows viewing both directly and at an angle. A built-in light source provides illumination of the viewed surface of the connector. Both the adapter and microscope are available from stock. Fotec, Medford, Mass.
Hot-bar Devices
 |
Extended-length Ceramic Hot Bar Technology (CHBT) devices are up to 200 mm long. They reportedly have been used for precision production-bonding operations in lengths of more than 6.50". The extended-length configurations of up to 7.88" are said to provide more flexibility for performing large bonding jobs in a single pass or bonding multiple connections simultaneously. They can be configured with cutout notches to accommodate intervening components at heights of up to 0.25". MicroJoin Inc., a subsidiary of Palomar Technologies Inc., Poway, Calif.
Needle-cleaning Kit
 |
This dispensing needle-cleaning kit was developed for cleaning material residue from internal surfaces of stainless-steel needles. Using the kit can reportedly prolong the effective life of the dispensing needle. Regular cleaning of needles in use is said to enhance the overall dispensing process. The kit can reportedly be used with any brand of dispensing needle. DL Technology LLC, Haverhill, Mass.
Thermal Printer
The DMX-E-4203 thermal printer is available as either a direct-thermal or thermal-transfer product, and is designed for a variety of label- and tag-printing applications. It prints an image area up to 4.1" wide and runs at a print speed of 3.0" per second. A 203 dpi resolution is featured, along with a three-button, three-LED control panel and a see-through media window. Weighing 5.2 lb, the printer is said to take up very little desk space. Datamax Corp., Orlando, Fla.
Flexible Epoxy
The 1670 Series is said to be a fast-curing, flexible, highly damped epoxy for adhesive and potting applications. The series reportedly protects electronic components ranging from transducers, sensors, load cells, magnetic coils and bobbins to power-supply applications where no inductance drop after potting or bonding is desired. Features are said to include a curing time of 10 minutes at room temperature, 2:1 mix ratio, tensile lap-shear strength of 1,000 psi and protection of components from internal stresses. Mereco Technologies Group Co. Inc., West Warwick, R.I.
Epoxy Adhesive
The 121-22 A/B is a two-part, room-temperature-curing, electrically conductive epoxy adhesive. Mix ratios for the product are said to be 4:1 by volume or 5:1 by weight. It is reportedly less sensitive to handling and ambient conditions than typical heat-curing systems. Applications for the product include making electrical and mechanical attachments on electrical components and devices and mounting temperature-sensitive components to rigid PCBs. Creative Materials Inc. (CMI), Tyngsboro, Mass.
Kevlar Shear
 |
The Model 9180 Kevlar Shear has cushioned rubber grips, which are said to be designed for comfort, regardless of hand size. A return spring opens the cutting head after each cut. Especially designed for cutting Kevlar, the shear has one serrated edge to prevent the fibers from sliding and another highly sharpened edge. Suitable for prepping and cutting fiber optic cables, it can also degate cast or stamped parts. Xuron Corp., Saco, Maine
Bar-code Printer
The Eltron 2746 is a metal-encased, thermal-transfer/direct-thermal bar-code and label printer. It is designed to ensure bar-code printing accuracy and performance for various industrial operations. The printer's 4" print width, 203 dpi print resolution, dual processors and flash-based architecture make it suitable for industrial labeling requirements. The unit reportedly produces consistent, rapid output in shipping and receiving, manufacturing, transportation and logistics, inventory tracking, and ticketing/tagging operations. Zebra Technologies Corp., Vernon Hills, Ill.
Epoxy
 |
The Polymer System EP39MHT is a two-component system that reportedly cures readily at ambient temperatures or more quickly at elevated temperatures. The cured epoxy is a thermoset solid that features physical, electrical and chemical characteristics with resistance to thermal and mechanical shocks. It is said to be 100 percent reactive and to not contain any volatiles. The epoxy is suitable for potting, encapsulation, sealing and bonding, and can be color-coded to facilitate processing. It is available in pints, quarts, gallons, 5 gallon pails and drums. Master Bond Inc., Hackensack, N.J.
Wire Crimp Machine
 |
The C 200 is a tabletop wire crimp tool that reportedly accepts a variety of dies from different manufacturers. Air-operated using standard factory air with a pressing capacity of up to 1,200 kp, this portable device is said to allow easy change of tools and setup for different crimp contacts. FKN Systek, Waltham, Mass.
Conformal Coating
 |
Rawn America Conformal Coating is designed to make electronic repairs in the field. VCI technology is said to provide complete corrosion protection using a secondary method of coverage. An acrylic-based formulation, the coating reportedly does not contain VOCs or other hazardous solvents. After repairing a PCB, field personnel can recoat with a few sprays from the 12 oz spray can. A UV indicator shows if complete coverage was attained or a quick touch-up is needed. Cortec Spray Technologies Div., Spooner, Wis.
Tool Case
 |
The Tool Hog tool case features three removal tool boards that connect to make a workstation. For smaller jobs, the detachable shoulder bag converts into a tool pouch. An internal file storage pocket carries paperwork. The large main compartment is said to open wide. It measures 17.5 X 12.0 X 12.0", and is constructed of two layers of rugged fabric sandwiching dense foam. It also has a padded wrap handle and shoulder straps. Jensen Tools Inc., Phoenix, Ariz.
Cable Ties
 |
In-Line Cable Ties feature "parallel entry" and reportedly thread like a belt at 180° with the performance of conventional 90° entry cable ties. The design eliminates the protrusion of the cut-off tie, protecting adjacent cables as well as workers' arms and hands. Available for bundle diameters ranging from 2 to 4", these cable ties feature a low-profile head that is said to help avoid snags and reduce overall bundle size. Rounded edges on the head and strap prevent sharp edges from coming in contact with cable insulation. Panduit Corp., Wiring Components Div., Tinley Park, Ill.
Underfill Series
 |
The Amicon E 1340 Series of no flow-fluxing underfills is said to enhance the reliability of area array device assemblies such as flip chip, CSP and BGA. The series incorporates solder fluxing capability into an epoxy-based underfill chemistry, resulting in an encapsulant for interconnecting/underfilling area array devices. The first product of the series facilitates solder joint interconnect and fully cures in a variety of SMT processing configurations by reportedly interconnecting and achieving full cure on only one typical reflow exposure plus an in-line post-cure. Emerson & Cuming, a National Starch & Chemical Co., Billerica, Mass.
Dispenser
 |
The Model 900 dispenser is designed to offer a way to apply grease and anticorrosion compounds without mess, rework or hand fatigue. The benchtop unit uses a timed-air pulse to deposit the correct amount of grease in every connector recess. This is said to reduce the guesswork, waste and cleanup of manual tools like hand syringes, improving productivity and connector appearance. User-friendly time and air pressure controls on the front of the dispenser are used to set the size of the grease deposit. EFD Inc., East Providence, R.I.
