Radiall second sources Amphenol for ruggedized wireless base station connectors - Connector Specifier

Radiall second sources Amphenol for ruggedized wireless base station connectors


Feb 8, 2011

Chandler, Arizona and Lisle, Illinois -- Radiall and Amphenol are pleased announced that Amphenol is now a licensed second source for the Radiall R2CT wireless base station connection kits. As a second source, Amphenol will manufacture and market these connectors.

RELATED STORIES: 
The coexistence of wireless LANs and distributed antenna systems
Anritsu teams with SweepMasters for 4G field test option

In Asia, ADC touts 4G wireless transition
Connector series targets wireless base station subsystems

Radiall's R2CT connection kit provides a waterproof, sealed connection for fiber-to-the-antenna (FTTA), remote radio head equipment, and similar outdoor applications where a protected interface is needed. The field-installable kit provides low-cost sealing at the transceiver-to-cable interface and ensures robust mechanical and environmental performance.

The kit is designed for optical systems using SFP transceivers and duplex LC-terminated fiber-optic cable, but can also be used with copper systems. The kit can be reused, allowing cables and transceivers to be changed in the field, including front-panel swapping of transceivers. The kits can also be assembled over existing cables.

“We welcome Amphenol as a second source for the R2CT product line,” says Marnix van der Mee, Business Development Manager for Multipin and Fiber Optic Products at Radiall. “The innovative system makes the installation and maintenance of FTTA applications faster and easier. With Amphenol as a certified second source, we can help extend the global acceptance of this new system.”

MORE NEWS:
After banner 2010, Amphenol implements stock repurchase program
Avnet, Amphenol ink European waterproof connector agreement
NAVSEA certifies Amphenol's shipboard fiber optic tool kits
Amphenol: Bulking up via buyout

 

“We are pleased to be able to offer R2CT products,” says Terry Basehore, Director of Business Development at Amphenol Fiber Optic Products. “The convenience offered by this line for achieving cost reductions and higher reliability in telecommunications towers should make it an important innovation in the market.”

For more information visit  www.radiall.com.

For more on Amphenol visit www.amphenol.com, www.amphenol-fiberoptics.com, and www.cablesondemand.com.


Editor's Picks

Incapable connectors shut down Large Hadron Collider

Amphenol: Bulking up via buyout

NASA unveils deep space MPCV exploration craft; Lockheed Martin responds

As UAV market surges, connectors adapt

NHTSA pressures Ford into mass F-150 truck recall on airbag wiring danger

Esterline acquiring Souriau for $715 million

Report: Single trader holds half of world's copper


Top Blog Posts

Inside Foxconn's deadly iPad factory after the blast

Fireproof electronic connectors: design challenges

Connector industry giants saw banner 2010 sales growth

Tearing down Apple's Thunderbolt cable

Massive solar tower will rank among world's tallest buildings


Most Popular Articles
Top Articles for 2011

Boeing exec admits 787 outsourcing strategy backfired

Foxconn staggering after full year net loss of $200M+

The Motley Fool' pits Amphenol vs. Molex

ITT issues military-aerospace connector sourcebook

SATA-IO unveils portable consumer storage specification

Raytheon locks in LaBarge for cruise missiles' wiring harnesses post-Libya bombing

Union group denies Verizon fiber lines vandalized

Northrop Grumman seeks to replace copper-based aircraft wire, cabling

Driving wiring harness design data toward manufacturing


Latest Community Discussions

Video: Fire breaks out at Foxconn's Shandong plant
Bystander video shows the scene of a fire breaking out on September 27 at Foxconn's Yantai Shandong plant where Sony consumer electronics products are reportedly assembled.

Testing the Boeing 787 Dreamliner's in-flight entertainment systems
Boeing video shows what was involved in testing (i.e. "trying to break") the in-flight entertainment, connectivity, and power systems on board the new 787 Dreamliner.

Belden FiberExpress Brilliance LC Connector Installation
Video details installation of a 900-micron OM3/OM4 prepped fiber into an LC connector.

Visit the Community >


Receive Free E-mail Newsletters from Interconnection World


You may select more than one newsletter  
Interconnection World
Connector Specifier
Wire & Harness Specifier

 
Name  
 
Email  
 
Country  
 
 
 

 
Sponsor Information

Interconnection World Content Categories:

Wire & Harness
 Data & Telecom
Standards Distributors
Design & Test Applications
Business Wire News
Video