Sullins adds double-point card edge connector - Connector Specifier

Sullins adds double-point card edge connector


May 5, 2009
Image

May 5, 2009--Sullins Connector Solutions, Inc.'s RDPS Series (Ruggedized Double Point Series) of card edge connectors are built for durability in high-temperature, harsh environment applications. The RDPS Series is engineered to accept 0.062" (1.58 mm) thick daughtercards and is comprised of 0.100" (2.54 mm), 0.125" (3.18 mm), and 0.156" (3.96 mm) contact centerline parts.

The parts' double-contact-point pin design promotes sturdier daughtercard retention than traditional card edge connectors. This proprietary pin design, coupled with material rating of from -65º to +150º C, helps ensure high mating cycles and long life for electronic systems and end products.

Devices are supplied in dip solder, wire wrap, right-angle bend, and card extender terminations, as well as with a choice of post lengths. Available mounting styles include clearance holes, threaded inserts, side mounting, and with/without mounting ears. Materials are UL94V-0 rated.

The RDPS Series may be specified to connect high-density PC boards to 0.062" daughtercards in a wide range of industrial, consumer, and commercial systems and end products that need be resistant to vibration, drop shock, and short-circuits involving printed tracks on the PC board.

The double-row parts feature a current rating of 3 amps per contact, and are provided in 6 to 70 contact positions (12 to 140 pins). Rated to withstand +150º C continual heat, parts' processing temperature range is up to 260º C peak for 120 seconds. Insulator material options are PBT, PA9T, or PPS. Connectors are supplied standard with 10 microinch or 30 microinch selective gold-plated phosphor bronze or BeCu (beryllium-copper) contacts to facilitate high-reliability soldering. They also feature a fully-insulated 50 microinch nickel underplate. Additional specifications include an insulation resistance of 5,000 megohms minimum at 125 VDC, and a 16-ounce maximum insertion force and a 1-ounce minimum withdrawal force per contact pair. Contact resistance is 30 milliohm maximum.

Parts rated to +175º C, and those requiring customization, may be special ordered. Typical prices for 6-position/12-pin RDPS card edge connectors start at $2.16 each in quantities of 1,000. Delivery is 5 days ARO.

On the Web: www.sullinscorp.com



Editor's Picks

Incapable connectors shut down Large Hadron Collider

Amphenol: Bulking up via buyout

NASA unveils deep space MPCV exploration craft; Lockheed Martin responds

As UAV market surges, connectors adapt

NHTSA pressures Ford into mass F-150 truck recall on airbag wiring danger

Esterline acquiring Souriau for $715 million

Report: Single trader holds half of world's copper


Top Blog Posts

Inside Foxconn's deadly iPad factory after the blast

Fireproof electronic connectors: design challenges

Connector industry giants saw banner 2010 sales growth

Tearing down Apple's Thunderbolt cable

Massive solar tower will rank among world's tallest buildings


Most Popular Articles
Top Articles for 2011

Boeing exec admits 787 outsourcing strategy backfired

Foxconn staggering after full year net loss of $200M+

The Motley Fool' pits Amphenol vs. Molex

ITT issues military-aerospace connector sourcebook

SATA-IO unveils portable consumer storage specification

Raytheon locks in LaBarge for cruise missiles' wiring harnesses post-Libya bombing

Union group denies Verizon fiber lines vandalized

Northrop Grumman seeks to replace copper-based aircraft wire, cabling

Driving wiring harness design data toward manufacturing


Latest Community Discussions

Video: Fire breaks out at Foxconn's Shandong plant
Bystander video shows the scene of a fire breaking out on September 27 at Foxconn's Yantai Shandong plant where Sony consumer electronics products are reportedly assembled.

Testing the Boeing 787 Dreamliner's in-flight entertainment systems
Boeing video shows what was involved in testing (i.e. "trying to break") the in-flight entertainment, connectivity, and power systems on board the new 787 Dreamliner.

Belden FiberExpress Brilliance LC Connector Installation
Video details installation of a 900-micron OM3/OM4 prepped fiber into an LC connector.

Visit the Community >


Receive Free E-mail Newsletters from Interconnection World


You may select more than one newsletter  
Interconnection World
Connector Specifier
Wire & Harness Specifier

 
Name  
 
Email  
 
Country  
 
 
 

 
Sponsor Information

Interconnection World Content Categories:

Wire & Harness
 Data & Telecom
Standards Distributors
Design & Test Applications
Business Wire News
Video