 |
AMC FOR ATCA BLADES–This AMC compression style mezzanine connector for standard ATCA platform blades meets or exceeds the latest PICMG ATCA specification, AMC.0 Rev 2, which requires support for data transmissions of up to 12.5 Gbits/sec per channel. The connector features one-piece stamped contacts,designed to provide seamless carrier board-to-mezzanine card paths. The captured individual contacts are designed to provide a low insertion force, with support for wide board planarities and multiple card insertions. Compression technology enables simplified trace routing and reduced stub-effects and reflections, and the solderless attachmentallows for simplified removal and rework. Also, the contact features a proprietary plating to minimize abrasions to the mezzanine card contacts.
CINCH CONNECTORS, LOMBARD, IL
www.cinch.com
 |
SINGLE-, DOUBLE-ROW MICRO–The 0.8-mm MicroStac SMT connector series now includes a 10-pin (single row) and 54-pin (dual row) version. MicroStac’s miniature construction is designed for extremely compact applications, ranging from sensor technology, medical instruments and mobile communication to automotive electronics, automation engineering, measurement technology, test equipment and building automation. For medical applications, new antistatic versions are available upon request. The stability of the miniature connector is facilitated through a tilt-proof contact principle with dual side positioning of the contact on the PCB. In addition, with its corresponding features of minimal weight (0.18g for the 6-pindesign), 100% SMT co-planarity of< 0.1 mm, and suction areas integrated in the insulating body for pick-and-place assembly, the MicroStac is suited for high-speed manufacturing requirements. With an ambient temperature of 20° C and current feed to all contacts, the MicroStac 50-pin connector can transfer 1.6 amps per contact. It features a high temperature-resistant insulating body (PA46), and 100% SMT coplanarity designed to ensure secure soldering.
ERNI ELECTRONICS, MIDLOTHIAN, VA
www.erni.com
 |
RIGHT-ANGLE PRESS-FIT–The ZipLine press-fit connector system now includes a right-angle signal header module. Designed to mate with an existing right-angle signal receptacle module, this header module provides 216 individual contacts and enables 72 high-speed differential connections betweencoplanar circuit boards. Complementary high-power and guidance modules are also available. Samples of the right-angle header for coplanar applications will be available midway through the second quarter of this year. The connectors use proprietary shield-less technology that enables low insertion loss and crosstalk without using metal shields. Data rates can scale up to 12.5 Gbits/sec without requiring the redesign of a basic platform. In addition, the design allows for mixed differential, single-ended, or power pin assignments within a connector.FCI, ETTERS, PA
www.fciconnect.com
 |
85-OHM BACKPLANE–The Impact 85 Ohm backplane connector system is designed to support Intel’s Quick Path Interconnect (QPI) standard, PCI Express Generation 2.0 and 3.0, as well as any proprietary system design where 85 Ohm differential impedance is desired. To allow designers the flexibility of interchanging100 Ohm and 85 Ohm signal modules based on system needs, the Impact 85 Ohm connector and 100 Ohm connector system have the same physical size, density, pitch, and PCB layout, and use the same guidance and power solutions. The Impact family is available in 2-, 3-, 4-, 5-, and 6- pair traditional backplane header and daughtercard connector versions that support differential signal densities ranging from 27 up to 80 pairs per linear inch.
MOLEX, LISLE, IL
www.molex.com/link/impact.html
 |
1.8-MM GPS CONTACT–The Universal GPS Contact is a 1.8-mm dry circuit pressure contact that, when mated and deflected, maintains true contact beam positioning with no conductivity to the side walls. The contact also achieves a mating force of 0.3N with 0.1-mm beam movement. The Universal GPS Contact is designed for GPS units, PDAs, mobile phones, PC card devices and wireless gaming applications. The contact allows freedom of board positioning, features a domed contact mating point and side wings, and its X-Y-Z movement provides a secure antenna connection. The single piece stamped-and-formed BeCu contact has a deflection of 0.9 mm and a free height of 1.8 mm. Pricing is approximately $0.075 to $0.095 each, depending on volume.
ITT INTERCONNECT SOLUTIONS, SANTA ANA, CA
www.ittcannon.com
 |
NARROW-BODY BOARD-LEVEL DEVICE–This narrow-body, super fine pitch, low profile board-level interconnect system is designed for applications where board real estate is at a premium. With a 4-mm wide socket strip and 5-mm wide terminal strip, the narrow body design of the super fine .4-mm pitch, surface-mount strip system (SS4/ST4 Series) provides significant board space savings. In addition, the standard mated stack height is a low-profile 4 mm from board-to-board, with a choice of application-specific heights from 4.5 to 6 mm. This fine-pitch system is available with up to 40 positions per row in a double-row design, and is rated at 75 GHz in single-ended, and 4.5 GHz in differential pair configurations when mated.
SAMTEC,NEW ALBANY, IN
www.samtec.com
 |
HEADERS, MATES FOR BOARD-TO APPS–SBH Series Fully Shrouded Male Box Headers and SFH Series Female Header Mates are engineered for board-to-board or board-to-cable connections, with applications including householdappliances, HVAC equipment, vending machines, and industrial machinery. The series is designed to significantly reduce the possibility of mismating, and helps designers reduce the vendor count per bill of materials (BOM). The dual-row SBH Series Box Headers are offered in1.27 x 1.27-mm, 1.27 x 2.54-mm, 2-mm, and 2.54-mm versions, with either straight or right-angle dipsolder terminations. Parts are supplied in surface-mount (SMT), insulation displacement (IDC), and plated through hole (PTH) styles. The SFH Series Female Matesare provided in corresponding contact positions with the box headers, and may be ordered with polarizing keys to ensure proper mating alignment. An optional strain relief feature on IDC female mates minimizes tension on cable connectors to promote longer product life.
SULLINS CONNECTOR SOLUTIONS,SAN MARCOS, CA
www.sullinscorp.com
 |
QUICK-CLICK M12 DEVICE–Four- and 5-wire S12 Quick-Connectconnectors are designed to mate to any fully threaded M12. Theconnectors are designed to quickly attach to and detach from any M12 connection;users can hear and feel the clickwhen it is fully attached. Applica-tions include connecting numerous junction boxes, where installation time can be reduced by 85 percent. The 4- and 5-wire S12 Quick-Connect cordsets use PVC jacket material, and all connectors are rated for 250 volts,4 amps, and provide IP67 protection. The line offers male or female,straight and right angle connectors, standard and custom lengths, and pigtails or extension cordsets. Fully encap-sulated mating receptacles with front and rear mount threads are also available.
TURCK USA, MINNEAPOLIS, MN
www.turck-usa.com
 |
HIGH-SPEED MEZZANINE–The Strada Mesa mezzanine connector system offers a pin and socket signal contact design that can be arranged in high-speed differential, high-density single-ended, and/or coax patterns. Additionally, the connector offers integrated power contacts, eachcapable of carrying 10 amps of current. Strada Mesa connectors are available with stack height options ranging from 8 to 42 mm. These connectors are designed for high-speed differential architectures utilizing printed circuit boards (PCB) arranged in a mezzanine application. The system features greater than15 Gbits/sec performance, and is available in three sizes, which when fully loaded with all differential pairs will yield 40, 80, and 160 pairs. The receptacle and header assemblies are press-fit to the PCB.
TYCO ELECTRONICS, HARRISBURG, PA
www.tycoelectronics.com
 |
ENHANCED CABLE-TO-BOARD SOLUTION–The MaxiBridge cable-to-board connector family now includes an enhanced set of positions and configurations. The complete portfolio now includes vertical and right-angled SMT male connectors in 2, 3, 5, 6 and 8-pin versions. The single-row connector (SRC) provides 12 amperes per contact in a 2.54-mm pitch, while the 8-pin version can handle up to 96 amperes. MaxiBridge has a mated height of 5 mm when used in the right-angle configuration. It is designed for most automotive, industrial or consumer applications requiring protection from vibration or accidental unmating. Current applications include LED automotive lighting and displays, industrial sensors and actuators, fans, power supplies, LCDs, TFTs, handheld units, and control panels.
ERNI ELECTRONICS, MIDLOTHIAN, VA
www.erni.coim
 |
CABLE-TO-BOARD ADDS PIN DESIGNS–In addition to previously introduced pin numbers of 2, 3, 4, 6 and 8, these 10- and 12-pin designs have been added to the single-row 1.27-mm pitch MiniBridge cable-to-board connector system. Applications for compact and flexible board-to-cable connections include sensor, actuator, power supply or data applications in automotive and industrial electronics, computer technology, consumer electronics, and medical engineering. The miniature MiniBridge solution offers a current carrying capacity of up to 4A per contact (at 20° C, depending on the cable). MiniBridge cable connectors can be used in an expanded temperature range extending from -55 to +125° C. The male connectors have SMT terminals with SMT mechanical board anchors, while the female connectors are terminated via insulation displacement on the cable. Vertical and angled male connectors and female connectors have a 90-and 180-degree cable outlet. In addition, the female connectors are available with two different locking features; a friction lock for normal vibration/shock load of stationary applications (black connector design) or a positive lock for high vibration/shock loads of mobile applications (red connector design).
ERNI ELECTRONICS, MIDLOTHIAN, VA
www.erni.coim
 |
3-PIECE MEZZANINE–The IT3 Series Mezzanine Connector is a 3-piece modular system designed for simplified assembly, reliable X-ray inspection, better reflow performance, and higher production yield between two parallel PC boards without sacrificing overall connector performance. The IT3 system consists of two low-profile receptacles mounted to each parallel PC board, with BGA solder balls mounted in a staggered array of 1.5 x 1.75-mm pitch. A floating interposer module connects the two mounted receptacles and is designed to reduce the possibility of mechanical damage to the BGA joints. Compatible with industry-standard footprints, the IT3 Series connector system is available in 100-, 200-, and 300-position modules, with interposers for board stack heights from 15 to 40 mm. These connectors are rated at 50 Ω single-ended impedance and 100 Ω differential impedance.
HIROSE USA, SAN JOSE, CA
www.hiroseusa.com
 |
26-PIN EDGE CARDS–The Express Card product line now features 26-pin edge card connectors. Available with multiple off-sets, snap-on and ultrasonic weld cover sets, customized end caps, host connectors, and single slot ejectors, these edge card connectors and cover sets meet the PCMCIA industry’s requirements for 34- and 54-mm-wide modules. With a universal slot design and module formats measuring 5 mm deep by 75 mm long, the connectors and cover sets enable both 34- and 54- mm Express Cards to fit in the same aperture.The 26-pin connector features a lifespan of 10,000 mating cycles, while the stainless steel cover sets can be snapped together or ultrasonically welded. Connectors and cover sets meet all PCMCIA EC requirements. Typical applications include notebook/desktop computers, storage media and server memory cards, wireless and wired communications, set-top boxes and handheld scanners, and security ID and biometric devices.
ITT INTERCONNECT SOLUTIONS, SANTA ANA, CA
www.ittcannon.com
IN-FLIGHT ENTERTAINMENT DEVICE–ned specifically for in-flight entertainment (IFE) systems used in commercial aircraft. Itfeatures proprietary Quadrax contacts for Gigabit Ethernet channels, along with a custom size-two shell designed to reduce EMI/RFI emissions. The connector has custom insert arrangements and pre-loaded inserts with extended tail contacts designed to eliminate unused positions and for faster PC board mounting, respectively. The connector’s polarizing keys were pre-loaded, and fixed proprietary PEM nuts were used to ensure no loose hardware upon installation.
ITT INTERCONNECT SOLUTIONS, SANTA ANA, CA
www.ittcannon.com
 |
TWO D-SUB SOLUTIONS–Two right-angle DB15 adapters and new male-to-male and male-to-female premium D-subminiature cables feature the DB15 interface.The right-angle adapters are designed for applications that require cables to be connected in tight spaces. They come in either “exit 1”or “exit 2” styles so the cable can approach from either direction.Premium D-Sub DB15 assemblies feature double-shielded cable (foil + braid), and are designed to solve data transmission problems where high levels of EMI/RFI are present.
L-COM GLOBAL CONNECTIVITY, N. ANDOVER, MA
www.l-com.com
 |
SMALL-CIRCUIT SYSTEM–MX150 cable-sealed, 1 x 2 connection system is designed to support low-level signal as well as power applications up to 22.0 amps for small-circuit size applications. Based on the 1.50-mm (.059”) width ISO blade-type terminal system, the MX150 offers increased sealing for a large range of SAE wire gauges (14 to 22 AWG), as well as metric size wires. It is also designed to provide low terminal-to-housing retention forces in excess of USCAR-2 requirements. This connector features all-in-one plug and receptacle housings, with a pre-assembled interfacial seal and terminal position assurance (TPA). It supports an optional connector position assurance (CPA) and clip slot to increase connector-to-connector and connector-to-vehicle retention during use.
MOLEX, LISLE, IL
www.molex.com
.25-MM PITCH FPC–This 0.25-mm (.010”) pitch FPC connector is designed to save up to 40 percent of space compared to similar 0.30-mm pitch connectors for applications in cell phones and other mobile devices. This new SMT ZIF (zero insertion force) connector, the company claims, offers the smallest overall size in terms of height, depth and length of any FPC connector in the market today. Available from 21 to 39 circuits, the SMT ZIF connector includes spring features on the terminals, designed to ensure secure electrical contact is maintained even if the cable is pulled up or down after actuation. The terminal design also provides full ZIF functionality, which means no contact is made between the cable and connector during insertion, providing protection against wear or damage to the FPC contact pads. The front flip Easy-On actuator is designed for simplified cable access and strong cable retention. An actuator-to-housing friction lock provides additional cable retention and an audible click when mating. The 0.25-mm pitch cable has a similar layout and tolerances as 0.30-mm pitch cable, which can make it more economical and easier to source than 0.20-mm pitch cable. The SMT ZIF bottom-contact series is rated at 0.2 amps and 50 volts. Operators can ensure the cable is properly placed, because it includes a large open area where the cable is inserted. The housing design also features a flat, open area to accommodate pick-and-place equipment. Front solder tabs under the housing provide space savings, stability, and strain relief for SMT solder joints.
MOLEX, LISLE, IL
www.molex.com/product/smt_ffc-fpc.html
 |
NON-MAGNETICS FOR MRI–These non-magnetic connectors are designed to protect against image and magnetic field distortion in MRI equipment, providing the necessary immunity to ensure scans are not compromised. The connectors can also be used in any application where high-purity, non-corrosive, lightweight metals with non-magnetic characteristics are essential, including medical equipment, military communications, aerospace satellites, and commercial PIM applications. Connectors exceed industry requirements for RF coils used in MRI applications, and are fully tested for magnetic permeability before shipping. Features include magnetic measurements checked at ≤ 1.00010 µr relative permeability; snap-on, push-on, or threaded couplings; custom non-magnetic solutions (contacts, connectors, and cable assemblies); and low to high frequency bands.
THE PHOENIX COMPANY, CHICAGO, IL
www.phoenixofchicago.com
HIGH-SPEED SYSTEM–The QEM8/QEF8 connector set combines an integral metal ground plane with a proprietary Edge Rate contact system designed for superior impedance control and reduced broadside coupling and crosstalk for improved signal integrity performance. The QEM8/QEF8 is footprint-compatible with the company’s QTE/QSE Series, providing a higher speed connector without PCB redesign. The Edge Rate contacts are designed to withstand “zippering” when unmated and are suited for rugged, high-speed applications. Other features of the QEM8/QEF8 Series include: .8-mm pitch; 7- and 10-mm stack heights; 20, 40, and 60 pins per row; dual row design; increased insertion depth and contact wipe; alignment pins. Pick-n-Place pads and Tape-n-Reel packaging is available. The QEM8/QEF8 Series is available for samples and production orders on 10-mm stack height, with 7-mm becoming available 3rd quarter.
SAMTEC, NEW ALBANY, IN
www.samtec.com
 |
STACKING BOARD-TO-BOARD–Expanding its 2-mm board-to-board and wire-to-board solutions, 3M Electronics Solutions Division’s 95X Series is designed to offer a lower cost, 10µ” gold solution for high-volume applications having less stringent requirements for the number of mating cycles, no exposure to temperature extremes or hostile atmosphere, and a relatively short service life. Uses for these stacking connectors include industrial applications, such as control units, consumer electronics such as home appliances, handheld test and measurement devices, and computing market segments.
3M ELECTRONIC SOLUTIONS DIVISION, AUSTIN, TX
www.3M.com/interconnects
 |
RIGHT-ANGLE SOCKET–The Mini-Clamp Connector product line now includes Right Angle Surfacemount Socket connectors. These connectors are available in 3- and 4-pins, and include three options for properly placing and locating the component on a PC board, as well as a PC board retention tab feature. They are designed to provide electrical connection between sensors, actuators, drives and control units without special tooling or wire preparation. Typical applications and industries for these discrete connectors include semiconductor and LCD manufacturing machines; medical, packaging systems, conveyor systems, elevators and lift systems; flowmeters; motion test and measurement systems; traffic light and control systems; LED lighting, signage, gaming base press control electronics; food and packaging industries; automotive and metal industries, and sensors. Mini-Clamp Connectors are available in 2-mm pitch and use color coding (red, yellow, orange, green, blue and gray) to provide for the proper wire usage, wire alignment and retention in the cover. They are available in 3- and 4-pin wire-mount configurations in socket, panel-mount socket, and plug versions.
3M ELECTRONIC SOLUTIONS DIVISION, AUSTIN, TX
www.3M.com/interconnects
 |
POKE-IN LIGHTING DEVICE–A through-hole version of the company’s SMT Poke-In connector for the LED lighting market. It joins the existing surface-mount connector and is designed to provide a low-profile solution suited for use in PCB-based LED strings, lighting controls, and other non-lighting applications. The connector is available in one or two positions, with single-position connectors offered in white or black for simplified polarity identification. Gel-filled versions are available for indoor or outdoor application where moisture is an issue. Standard- and low-insertion-force versions are side-to-side stackable on 4-mm centers. This poke-in connector is designed as a low-labor alternative to hand soldering wires, particularly when used with single-sided aluminum clad circuit boards. It is available in tape and reel packages for high-speed SMT and through-hole processing equipment, while the high-temperature plastic housing is reflow solder process-compatible. The connectors are UL c/UL recognized 5 A at 250 volts AC/DC, and can be used with 18-22 AWG solid wire, 18-20 AWG pre-bond stranded wire, or 18 AWG stranded wire. Mechanical wire retention is rated for 5 pounds minimum.
TYCO ELECTRONICS, HARRISBURG, PA
www.tycoelectronics.com
 |
150 A POWER INTERCONNECT–The 150 amp Crown Clip Junior connector is designed to mate directly to a power bus bar. Providing a space-efficient interconnection in solder or screw-mount configurations, the connector is suitable for telecom power supply and power distribution applications, including core network energy systems, cellular base stations, PSU power distribution, servers, storage and network routers, and industrial applications. The Crown Clip Junior connector mates with a 3.0-mm thick plated bus bar, providing a separable interface designed to ease assembly, inspection, and troubleshooting. This right-angle connector can be soldered directly to a PCB or screwed to a bus bar for a 150 A current rating at less than 30° C temperature rise. Featuring the Crown Band contact design, the selectively plated, high conductivity copper contacts are designed to offer low resistance and low milli-volt drop, reducing temperature rise for more efficient power distribution. In blindmate applications, this connector is built to handle adverse tolerances through a proprietary anti-stress feature, allowing reliable mating even to misaligned bus bars.
TYCO ELECTRONICS, HARRISBURG, PA
www.tycoelectronics.com
 |
HIGH PIN COUNT SMT–The B2B High Density SMT Connector line is now available in a 19.05-mm (.750 inch) mated height. Designed for high pin count and high density 1.27-mm pitch board-to-board applications, such as servers and routers, the newest member of the series is available in 8- and 10-row configurations from 240 to 500 positions. This SMT connector line employs screw-machined terminals with multi-finger contacts and proprietary solder ball terminal design. With a current rating of 3 A per pin, more contacts can be assigned to data/signal transfer (i.e., fewer pins are sacrificed for power/ground). With stack heights from 6 mm (.236 inch) and now up to 19.05 mm (.750 inch), the B2B SMT connector line is especially suited for mezzanine board stacking applications. RoHS-compliant Sn/Ag/Cu solder ball terminals are available, along with tape-and-reel packaging for automated pick-and-place.
ADVANCED INTERCONNECTIONS CORP., W. WARWICK, RI
www.advanced.com
 |
INTEGRATED PINS FOR MEZZANINE CARD APPS–The expanded MicroSpeed family includes a new Blind-mate version for mezzanine card applications. The MicroSpeed connector is a 1.0-mm pitch system using SMT technology for data rates up to 10Gbits/sec. MicroSpeed is available in 50 signal contact modules and is designed to be used in multiples between two parallel cards without mating issues from negative tolerance stack up. The design allows many smaller connectors to be used to shorten PCB traces, reduce PCB layers and improve system airflow by providing a narrow profile. Two rows of 50-signal contacts with perimeter shielding present an “open pin field” design suitable for differential and single-ended requirements. The Blind-mate designs have integrated guide pins with higher displacement tolerances to stop incorrect, forced connections. Reinforced housing side walls absorb the larger forces that may result from virtual “blind mating” to prevent connector damage while providing a positive connection. This characteristic offers advantages specifically with larger, heavier PCBs that can be connected without additional board guides. MicroSpeed Blind-mate will initially be introduced in the standard height of 1 mm for the male connectors and 4 mm for the female parts for a combined 5 mm board-to-board height.
ERNI ELECTRONICS, MIDLOTHIAN, VA
www.erni.com
