 |
This 31-mm stand-off bundling clip is designed to provide separation of 31 mm between the mounting hole and the bundle, protecting the wire bundle from heat and abrasion. The clip features anti-sliding bars designed to prevent the tape or cable tie from slipping off if the bundle is pulled. The proprietary fir tree design provides extremely low insertion forces. It is available for either single- or dual-bundle applications. The 7x12-mm Fir Tree Push Mount Tie features a fir tree design that provides a single mounting solution for a wide range of cable and wire bundling applications, specifically mounting wire harnesses in oval and rectangular 7x12-mm panel holes and blind assembly holes. The fir tree base locks and secures the bundle onto the panel by latching onto the opposite side of the panel surface. The disc on top of the fir tree covers the insertion hole, reducing the ingress of dust, dirt, and water. The outside serrated tie, with 50-pound tensile strength, comes in two strap lengths to accommodate bundle sizes from 6.5 to 8.5 inches.
null
 |
HELLERMANNTYTON, MILWAUKEE, WI
www.hellermann.tyton.com
