40-Gbit device targets InfiniBand as ‘ubiquitous’ data center interconnection - Connector Specifier

40-Gbit device targets InfiniBand as ‘ubiquitous’ data center interconnection


Oct 1, 2007

CARLSBAD, CA - Billed as the world’s first CMOS Photonics product, Blazar-a 40-Gbit optical active cable (OAC) developed by Luxtera (www.luxtera.com)-will combine the benefits of optical modules and copper cables to deliver a high-bandwidth interconnect solution for InfiniBand and 40-Gbit proprietary rack-to-rack interconnect applications.

With support for Quad Data Rate (QDR), the singlemode cable’s 40-Gbit bandwidth and extended reach up to 300 meters is designed to overcome speed and range barriers that have limited InfiniBand applications to small computer clusters. Luxtera says Blazar will enable InfiniBand to become “a ubiquitous data center interconnection” for a wide range of applications that require higher capacity and performance.

“This is a groundbreaking technology,” says Jag Bolaria, senior analyst at The Linley Group (www.linleygroup.com). “Migration to 40G connectivity allows for denser clusters, and the 300 meter range extends the reach of these clusters. This should have a positive impact for high-performance computing and data centers.”


Blazar, said to be the industry’s first 40-Gbit optical active cable, combines optical modules and copper cabling to provide high-bandwidth interconnection to the data center.
Click here to enlarge image

Luxtera says Blazar will enable data center managers to fully populate racks with servers and switches, eliminating the need to expand physical facilities to increase computing capacity. In addition, the cable’s power consumption is rated at 2.2 watts per cable end, resulting in 0.05 watts per gigabit of data, reducing the overall power consumption required by data centers to power network equipment, and significantly reducing cooling costs.

By permanently attaching fiber cable to optical transceivers, and powering four transmitters with a single hermetically sealed laser, Blazar is designed to reduce installation and maintenance costs while providing more reliability compared to typical VCSEL-based technologies.

Blazar connects to a system via a QSFP MSA-compliant connector cage. The electrical cage is SFP+ compliant, which enables it to support data rates of 1 to 10.5 gigabits per transport lane, for a total throughput of up to 42 Gbits/sec.

Luxtera will begin sampling Blazar later this year, with production quantities available in 2008.


Editor's Picks

Incapable connectors shut down Large Hadron Collider

Amphenol: Bulking up via buyout

NASA unveils deep space MPCV exploration craft; Lockheed Martin responds

As UAV market surges, connectors adapt

NHTSA pressures Ford into mass F-150 truck recall on airbag wiring danger

Esterline acquiring Souriau for $715 million

Report: Single trader holds half of world's copper


Top Blog Posts

Inside Foxconn's deadly iPad factory after the blast

Fireproof electronic connectors: design challenges

Connector industry giants saw banner 2010 sales growth

Tearing down Apple's Thunderbolt cable

Massive solar tower will rank among world's tallest buildings


Most Popular Articles
Top Articles for 2011

Boeing exec admits 787 outsourcing strategy backfired

Foxconn staggering after full year net loss of $200M+

The Motley Fool' pits Amphenol vs. Molex

ITT issues military-aerospace connector sourcebook

SATA-IO unveils portable consumer storage specification

Raytheon locks in LaBarge for cruise missiles' wiring harnesses post-Libya bombing

Union group denies Verizon fiber lines vandalized

Northrop Grumman seeks to replace copper-based aircraft wire, cabling

Driving wiring harness design data toward manufacturing


Latest Community Discussions

Video: Fire breaks out at Foxconn's Shandong plant
Bystander video shows the scene of a fire breaking out on September 27 at Foxconn's Yantai Shandong plant where Sony consumer electronics products are reportedly assembled.

Testing the Boeing 787 Dreamliner's in-flight entertainment systems
Boeing video shows what was involved in testing (i.e. "trying to break") the in-flight entertainment, connectivity, and power systems on board the new 787 Dreamliner.

Belden FiberExpress Brilliance LC Connector Installation
Video details installation of a 900-micron OM3/OM4 prepped fiber into an LC connector.

Visit the Community >


Receive Free E-mail Newsletters from Interconnection World


You may select more than one newsletter  
Interconnection World
Connector Specifier
Wire & Harness Specifier

 
Name  
 
Email  
 
Country  
 
 
 

 
Sponsor Information

Interconnection World Content Categories:

Wire & Harness
 Data & Telecom
Standards Distributors
Design & Test Applications
Business Wire News
Video