LANYARD DISENGAGEMENT
![]() |
Quick Disconnect Connectors with Lanyard Release are designed to disengage from each other when applying axial force to the lanyard but remain connected when applying axial pressure to the coaxial cable. According to the company, the design ensures that the connectors will remain securely mated in their application until a quick disengagement is required, while also preventing accidental disengagement due to coax tension. These connectors are custom-manufactured in a variety of line sizes, materials, and finishes.
AVIEL ELECTRONICS, LAS VEGAS, NV
www.avielelectronics.com
SMA to SMB ADAPTER
![]() |
Model 412491315 is an SMA female-to-FAKRA-SMB male adapter designed to mate with FAKRA SMB female connectors in automotive test applications, such as satellite radio, GPS and vehicular Internet access. The adapter features DC to 4 GHz, VSWR <1.2:1, and 0.5 dB maximum insertion loss. According to the company, interconnect yield is high since less force is required.
BROADWAVE TECHNOLOGIES, FRANKLIN, IN
www.broadwave.com
RCA CRIMP DEVICES
![]() |
RG-59/U and RG-6/U RCA push-on crimp connectors are designed for 75-ohm coaxial cable. Built for audio/video equipment manufacturers who wish to build their own cable assemblies, these connectors are commonly used for composite video and high-end audio.
L-COM CONNECTIVITY PRODUCTS, N. ANDOVER, MA
www.L-com.com
ANALOG VIDEO, HD SYSTEM
![]() |
These 23- and 25-AWG mini-RGBHV cables and single-piece compression connectors are suitable for serial, high-definition, and analog video applications. The QuickLinx cables feature solid-gauge construction designed for improved signal distance transmission and frequency response by 15% over typical stranded-center conductor cables. Single-piece BNC and RCA ConnecTec connectors eliminate handling multiple pieces, saving up to 60% on a typical installation. BNC connectors are available in nickel-plated versions, while RCA connectors are available in nickel- and gold-plated versions.
LIBERTY WIRE & CABLE, COLORADO SPRINGS, CO
www.libertycable.com
SMA BUILKHEADS
![]() |
A variety of SMA bulkhead-mount connectors for OEM applications include front- and rear-mount configurations with solder cup electrical terminations. Connector bodies are machined brass with nickel gold plating, and all dielectrics are PTFE with gold-plated contacts. Male and female SMA interfaces are available.
RF CONNECTORS/ RF INDUSTRIES, SAN DIEGO, CA
www.rfindustries.com
HIGH-SPEED, HIGH-DENSITY RF
![]() |
QMS/QFS Q2 high-density, high-speed connectors with high signal and ground pin counts can be combined with MMCX-scale or other RF connectors to provide excellent board-to-board flexibility and functionality. These connectors feature one or two RF connectors per end, with up to 156 single-ended or 48 signal pairs per connector on 0.635-mm pitch with an internal ground plane. High-density connectors on 2-mm pitch feature up to 80 signal/ground pins and six RF connectors as standard.
SAMTEC, NEW ALBANY, IN
www.samtec.com
INDUSTRY STANDARD, CUSTOM RF
![]() |
This line of radio frequency (RF) connectors and adapters targets wireless, telecommunications, broadband, and instrumentation applications. Types include: MMCX, MCX, SMA, SMB, BNC, TNC, QMA, 7/16, and N-type families. Details and specifications are available at the company’s online catalog.
VOLEX GROUP, HICKORY, NC
www.volex.com/connector











