COMPACT POWER INFO
 |
An expanded Compact Power Connectors catalog features key features and benefits of each of the company’s connectors, as well as product specifications, wire/tooling information, dimensions, and temperature rise charts.
ANDERSON POWER PRODUCTS, STERLING, MA
www.andersonpower.com
TOOL KIT FOR HEAVY-DUTY CRIMPS
 |
The RFA-4009-20 cushion-gripped crimp handle weighs 1.3 pounds and is designed to deliver piston-driven compression for installation of crimp ferrules on large-diameter cables. For safety and efficiency, the ratcheting mechanism is designed to release only after the ferrule is completely crimped. Two die sets are available for use with this crimp handle. The RFA-4009-01 has a 0.61-inch hex cavity for use with 0.6-inch-diameter cable. The RFA-4009-02 is designed for use with 0.4-inch-diameter cable with a 0.429-inch hex cavity for ferrules and a 0.118-inch hex cavity for contacts. The RFA-4009-02 kit contains the RFA-4009-20 handle and both the RFA-4009-01 and RFA-4009-02 die sets packaged together in a form-lined plastic case with expansion slots to accommodate four additional die sets.
RF INDUSTRIES, SAN DIEGO, CA
www.rfindustries.com
SILICONE-BASED STRAIN RELIEF
 |
This new durable strain relief design specifically targets medical/health care equipment. Compared to typical strain relief methods, which have been constructed with hard-to-clean chambered slots, this strain relief technology features a medical-grade silicone rubber that offers a smooth and cleanable surface. The RoHS-compliant strain relief is also available in PVC, polyurethane, and thermoplastic elastomer formulations.
C&M CORP., WAUREGAN, CT
www.cmcorporation/strainrelief
CLEAR CONNECTOR COVERS
Made of a polycarbonate, Clear H-Tap covers let you inspect the connector both during and after the installation. The high-impact, flame-retardant covers offer a two-piece positive latching system. Patented flexible fingers wrap around the conductor to hold the cover in place. A built-in magnifying glass allows for increased connector visibility, while markings verify a correctly installed connection. Clear H-Tap covers also have built-in exterior channels designed to hold either the supplied wax cord or cable ties after installation.
FCI ELECTRONICS, ETTERS, PA
www.fciconnect.com
WALL PLATE INTERCONNECT
 |
The IPS (Intelligent Plate Solutions) line offers a variety of interconnect solutions designed to handle audio/video interface applications. Unlimited combinations of IPS inserts and active and passive interfaces are designed help installers customize a project within budget. A selection of wall plates manufactured of 1⁄4-inch thick milled aluminum is available in white, black, and ivory.
FSR INC., W. PATTERSON, NJ
www.fsrinc.com
PCB SPACERS
Metric male/female standoffs, molded in Nylon 6/6, are resistant to vibration, abrasion, and corrosion. They are electrically insulating, non-magnetic, and have a high strength-to-weight ratio. These threaded PCB spacers are 6 to 25 mm long, and are offered in three thread sizes: M3 × 0.05, M3.5 × 0.6, and M4 × 0.7.
MICRO PLASTICS, FLIPPIN, AR
www.microplastics.com
HIGH-DEFINITION EXTENDER
 |
HDMI-X fiber-optic extender is designed for high definition multimedia in video wall systems, medical imaging equipment, and home theater. It includes a HDMI transmitter and receiver, plus an external 12-volt power supply adapter. Cables include four-strand 50/125-μm fiber, Category 5e copper, and HDMI-all of which can be terminated at a specific length required for a given installation.
RAPCOHORIZON CO., JACKSON, MO
www.rapcohorizon.com
HARSH ENVIRONMENT CONVERTERS
 |
Two new PSI-MOS Profibus fiber-optic converters with conformal-coated printed circuit boards have been designed for use in shipbuilding and marine applications. Conformal coating gives added protection from salt water, moisture, dust, and other corrosive elements. Devices are approved for use in UL Class 1, Division 2 hazardous locations where volatile/flammable materials are typically found.
PHOENIX CONTACT, MIDDLETOWN, PA
www.phoenixcon.com
CABLE ASSEMBLIES FOR HDMI
 |
High-speed Data Rate cable plugs (HPDPI Series) are designed to mate with industry-standard HDMI connectors. Built for cable-to-board applications in rugged environments, this 20-AWG twin-ax micro ribbon cable features 100-Ω differential signal routing with estimated performance of up to 1.5 GHz at one meter (depending upon signal type). The cable assemblies feature a choice of five or eight signal-pair, with five power lines. A rugged housing with side grips is designed for easy connect/disconnect without pin damage.
SAMTEC, NEW ALBANY, IN
www.samtec.com
MIL HYBRID CABLES
 |
These MIL-rated hybrid cables combine fiber and copper into one cable assembly, allowing for simplified installation of military and broadcast applications at only one point of entry. According to the company, the cable’s copper wire can carry power while the fiber can transmit data, without the risk of EMI. Available in customized lengths and channel counts, the hybrids are offered in D38999 and M28876 designs, as well as other ruggedized/harsh environment connector designs.
TIMBERCON, LAKE OSWEGO, OR
www.timbercon.com
TEST KIT ACCESS CARD
 |
The Repeater Access Card plugs into T-1, 56 KB, HDSL, and ISDN apparatus cases for easy access to wiring via an RJ-45 port. Plug the Access Card into mini T-1 slots to verify wiring and perform cable loss testing. The kit includes access cords and an eight-position modular tester.
WESTEK ELECTRONICS, SANTA CRUZ, CA
www.westek.com
THRU-PANEL TERMINAL BLOCK
 |
Providing a current-carrying capacity of 60 amps at 600 volts, the Series OTB-357 terminal block is suitable for motor control, power supply, and power distribution design. It accepts wires from 3 to 10 AWG, and includes a snap cover for safety. Terminals are nickel-plated brass while housing is a black PBT plastic. Offering 2 to 15 positions with 16-mm spacing, these terminal blocks are UL- and CUL-recognized.
BLOCKMASTER ELECTRONICS, ELK GROVE VILLAGE, IL
www.blockmaster.com
CONDUCTOR TERMINATION LUG
 |
For conductor termination in confined spaces, such as molded case circuit breakers, motor controls, and other panel or control components, the line of UL-listed Color-Keyed Narrow Tongue Lugs has been redesigned with an engineered width for a uniform connector dimension. The lugs are made of high-conductivity, seamless, electrolytic wrought-copper tubing that is electro-plated with tin to prevent corrosion. Other features include a double-chambered barrel to facilitate safe insertion of conductors into the lug, and color-coding to ensure correct matching lugs to die sets, correct number and location of crimps for installation, and proper inspection and verification of connections.
THOMAS & BETTS, MEMPHIS, TN
www.tnb.com
