SPECIALTY CORDSETS
 |
These new multiple cable cordsets and expansion connectors are designed for expanding the number of connections to each port on a sensor distribution box. Cordsets feature M12 connectors, available in one wired to two, or three separate M12s in both male or female, and combinations of both types. Available in PVC, PUR, or special insulation material available on request, the cordsets come in a standard 1-meter length. Special lengths and connector configurations are available.
AUTOMATION SYSTEMS INTERCONNECT, INC., CARLISLE, PA
www.asi-ez.com
IDC CONNECTOR
 |
Featuring either two- or three-way IDC technology and a small PCB footprint, the 9175 Series of 3.45-mm connectors is designed for high-volume consumer products. It saves space by connecting two or three wires to PCBs, and has a current rating of 1 amp continuous with a voltage rating of 125 volts. Minimum insulation resistance is 100 MΩ, maximum termination resistance is 20 mΩ, and temperature range is -40° to 80° C.
AVX CORP., MYRTLE BEACH, SC
www.avx.com
INDUSTRIAL DIN
 |
The 423 Series industrial DIN connector features an M16 threaded coupling system designed in accordance with IEC 130-9. The system is sealed to IP67 and is built to achieve a high degree of shielding through shielding rings. Internal strain relief is designed to firmly grip cables having a diameter from 4 to 8 mm. This connector system supports from 2 to 24 contacts, and is intermateable with the company’s 425 and 723 Series. DIN and stereo layouts are available.
BINDER-USA, CAMARILLO, CA
www.binder-usa.com
MULTIPLE POLE SINGLE-ROW SYSTEM
 |
Single-row MiniBridge cable connectors feature a pitch of 1.27-mm. Originally launched in a 4-pin version, additional models are now available with 2, 3, 6, and 8 poles. MiniBridge connectors are designed for sensor, actuator, power supply, and data applications. They offer a high current-carrying capacity of up to 4 amps at 20° C, depending on cable. Male connectors have SMT termination while female connectors use IDC termination. In addition, female connectors are available with a variety of locking latches to address normal vibration/shock loads and applications involving heavy vibration/shock loads.
ERNI ELECTRONICS, MIDLOTHIAN, VA
www.erni.com
NEW POWER VARIANTS
 |
The AirMax VS backplane connector system now features a 2 × 3 version for applications requiring additional power delivery but lacking the linear board space for two adjacent 2 × 2 power connectors, and a 2 × 2 version designed to match the 11.5-mm above-board height of AirMax VS three-pair signal connectors. A lower vertical profile lets you employ these power modules on the same 16.7-mm slot pitch as the three-pair connectors, and increases air flow in a chassis having wider slot spacing. These connectors are suitable where more powerful processors are continuously added, such as servers and storage systems, switches and routers, and medical electronics and instrumentation.
FCI, ETTERS, PA
www.fciconnect.com
PVC-COVERED ALUMINUM CONNECTOR
 |
The black Burndy UNITAP UV-rated, PVC-covered aluminum connector is a pre-insulated connector for line splice, reducer, and tap applications. Available in single- and double-sided, as well as splice and mountable versions, the black UNITAP is designed for the contractor, maintenance and repair markets. This connector line is covered in Plastisol, eliminating the need for taping during installation, and providing chemical resistance as well as protection from abrasion. Dual-rated for copper and aluminum applications (UL-listed up to 600 MCM and CSA-certified for applications up to 600 volts and 90° C), and with multiple configurations that accommodate a variety of applications, the connectors are pre-filled with Penetrox oxide inhibitor, and are contaminant-free.
FCI BURNDY, MANCHESTER, NH
www.fciconnect.com
LONGER DISTANCE SIGNAL DELIVERY
 |
These Extended Reach double-data-rate (DDR) cable assemblies are designed for more than triple the reach of DDR InfiniBand cables. Featuring the company’s patented Eye-Opener conductor technology, combined with Quellan’s Q:Active ultra-small, low-power analog semiconductors, these cable assemblies are built for expansive cluster footprints within large data centers. The small and lightweight cables are designed to significantly reduce cable bundle size, allowing for increased system airflow plus ease of routing. According to the company, the assemblies offer improved performance resulting from low power consumption and latency, reduced crosstalk, and increased margins.
W.L. GORE & ASSOCIATES, ELKTON, MD
www.gore.com
LOW-PROFILE INTERFACE
 |
At 2-mm high, the LX Series of low-profile interface connectors are nearly 30% shorter than the company’s 3200 Series. These connectors are built to withstand a 30N maximum force applied in any direction when mated, and offer 5,000 mating cycles without loss of electrical or mechanical performance. They’re designed for such applications as cell phones, PDAs, digital cameras, and other hand-held compact devices.
HIROSE ELECTRIC USA, SIMI VALLEY, CA
www.hirose.com
SOLID-CENTER CONDUCTOR
 |
ConnecTec RGB compression connectors features a solid-center conductor that allows for the use of a one-piece connector. Typically, mini-RGB cables have stranded center conductors and need three- or four-piece connectors for successful termination. But according to the company, ConnecTec’s one-piece design helps installers who use 25- and 23-AWG cables to achieve the same time savings found when using RG-59 and RG-6 cables. ConnecTec BNC connectors are available in nickel-plated versions, while RCA connectors are available in both nickel- and gold-plated versions.
LIBERTY WIRE & CABLE, COLORADO SPRINGS, CO
www.libertycable.com
SOLDERLESS XLR
 |
The Crimp-XLR connector is designed for large cable assemblies and solderless RoHS applications. Three-pole FXX (NC3FXX-A-D) and MXX (NC3MXX-A-D) cable connectors are terminated on semi-automated machines and include boot assembly and cable testing. Three-pole FXX and MXX connectors (NC3FXX-HA and NC3MXX-HA), as well as three-pole NC3FD-LX-HA and NC3MD-LX-HA chassis connectors, are terminated with hand crimp tools.
NEUTRIK USA, LAKEWOOD, NJ
www.neutrikusa.com
10-GBIT SMALL-FORM-FACTOR PLUGGABLES
 |
XFP001/2/3-L Series 10-Gbit small-form-factor pluggable (XFP) modules are designed for use with 10-Gbit hot pluggable optical transceiver modules, and support three different heat sink profiles. An external clip attaches to the top of the heat sink and cage, holding it in place and designed to maintain a solid mechanical contact between the optical transceiver and heat sink. The company claims this feature assures minimal thermal resistance and maximum heat dissipation properties without degrading EMI performance. The nickel-plated copper alloy prevents oxidation, while an insulating barrier underneath the main body of the cage is designed to prevent PCB signal traces from shorting to the underside of the cage. The company can customize the heat sink profile so designers can configure their PCB architecture to maximize heat dissipation according to the cage location and connector within the application.
PULSE ENGINEERING, SAN DIEGO, CA
www.pulseeng.com
SIGNAL-ROUTING INTERCONNECT SYSTEM
 |
PowerStrip power-to-board interconnect systems, available on .250-inch pitch with signal pins on .100-inch pitch, are rated for applications up to 28 amps at 80° C, and have up to eight blade-style contacts. Designed for parallel board spacings of 19-mm, and for perpendicular and coplanar board interface applications, these polarized through-hole connectors can be used for rugged applications. Right-angle versions have screw-down features for added strength. PowerStrip systems are RoHS-compliant and suitable for lead-free processing.
SAMTEC, NEW ALBANY, IN
www.samtec.com
CATEGORY 6A JACKS
 |
The SS-60300 Series of Category 6A PCB-mounted jacks feature internal compensation to enhance electrical performance without the need for extensive secondary compensation on the main PCB. Designed for 10-Gigabit Ethernet networking and computing applications, the jacks’ patent-pending design integrates the capacitive and inductive compensation on a flexible circuit board that attaches directly to the tips of the jacks’ contacts, close to where the jack and modular plug connect. According to the company, this close proximity helps cancel NEXT crosstalk introduced to the jack from the plug. In addition, as the flexible circuit board attaches to the jacks’ contacts, the jacks are designed to preserve the standard modular connector design, thereby ensuring durable and reliable connections.
STEWART CONNECTOR, GLEN ROCK, PA
www.belfuse.com/StewartConnector
ETHERNET-COMPATIBLE CIRCULAR DEVICES
 |
The AMP Circular Plastic Connector (CPC) product line now includes the Series 45 Ethernet connector, which accepts RJ-45 inserts for communication applications. Featuring rugged shells, housings, and receptacles, and with IP67 sealing performance, Series 45 connectors are designed for Category 5 and 5e cable, and are appropriate for industrial machinery, diagnostics equipment, printers, and other applications where ruggedization and environmental sealing are required. Also, the company’s LC ODVA-conforming connectors are designed for inside and outside industrial plant applications and equipment that interface with Industrial Ethernet networks or remote-interface applications (such as towers and antennae). The IP67-rated device, which ensures protection from dust and water immersion, is suited for temperatures ranging from -40° to 85° C, are made of flame-retardant materials per UL 94 V-O, and qualified to Telcordia G-326 and TIA/EIA 568-B.3 standards. Available for both singlemode and multimode fiber, it features a bayonet-style mechanical lock, dual-mounting bulkhead design, and redundant interfacial, cable and panel seals.
TYCO ELECTRONICS, HARRISBURG, PA
www.tycoelectronics.com
