CRIMPING TOOL
 |
The LPHY46 KOMPRESSOR remote-operated, low-pressure (1500 to 2500 psi), hydraulic, 15-ton crimping tool features a visual crimp indicator, and is double-acting for hydraulic ram advance and retract. The LPHY46 also features a spring back-up for ram retraction in case of hydraulic pressure loss. The tool can be powered directly from open- or closed-center hydraulic tool circuits present on most utility trucks, or from portable low-pressure hydraulic power packs. The LPHY46 can be switched from open- to closed-center operation.
FCI-BURNDY, MANCHESTER, NH
www.fciconnect.com
CONNECTOR SEATING MACHINE
 |
The CSM 200 is a semiautomatic machine for the application of RoHS-compliant pin connectors, providing end users with a fast, reliable, and less operator-intensive method. The heart of the CSM 200 is a BMEP servo-electric press that allows for the monitoring and control of force, distance, and speed during the press process. Operators manually load a PCB and connectors onto fixtures and tooling that include sensors to help ensure proper location. The system specializes in processing right-angle board-edge connectors with non-overmolded pins.
TYCO ELECTRONICS, HARRISBURG, PA
www.automation.tycoelectronics.com
SOLDERING SYSTEM
 |
The ELECTROVERT VectraElite advanced wave soldering system is designed for medium- to high-volume production, providing the tools necessary to achieve a zero-defect process. The system’s modularity and ergonomic features maximize front access with a fold-down pneumatic panel and swing-open corner panels. All major components slide out to facilitate maintenance.
SPEEDLINE TECHNOLOGIES, FRANKLIN, MA
www.speedlinetech.com
X-RAY IMAGE PROCESSOR
 |
The VIPx is a PC/Windows-XP-based image processor that delivers advanced solder joint-, package-, and PCB-level diagnostic software capabilities for enhanced visualization, precise measurement, and user-defined (pass or fail) analysis of SMT/BGA solder joints, PCBs, components, mechanical parts, and electrical interconnections. The VIPx is an advanced, application-centric tool set that increases inspection accuracy and productivity through algorithm-based inspection modules. FOCALSPOT, SAN DIEGO, CA
www.focalspot.com
CABLE STRIPPER
 |
The ESD thermal wire stripper prepares wires for termination to MIL-Spec connectors. The TWC models prepare cables and nick-free wire. The devices remove a variety of insulation types with strip lengths up to 3.5" for single-strand, multi-strand, or shielded wire. The included controller allows adjustment of the blade temperature to accommodate low- and high-melt insulations on 5- to 38-AWG wires in ESD-sensitive environments.
TELEDYNE INTERCONNECT DEVICES, SAN DIEGO, CA
www.teledyneinterconnect.com
WIRE-TERMINAL TESTER
 |
The WTTM wire-terminal pull tester measures the pull or “pull-off” force on most soldered or solderless wire terminals, crimped connectors, and similar wire terminations. It provides an all-in-one solution suitable for terminal-testing applications, eliminating the need for additional grips, fixtures, or accessories. The WTTM employs strain-gauge sensing to provide high resolution with an accuracy of 0.5%, and satisfies MIL, UL, SAE, DIN, IEC BS, and EN standards. It operates on 85- to 265-VAC power for worldwide use. Also supplied are free data-transfer software, serial cable, and a NIST calibration certificate.
ELECTROMATIC EQUIPMENT, CEDARHURST, NY
www.checkline.com
HEAT TOOL
 |
The handheld Glo-ring IR heat tool is used for heat-shrinking, plastic-tube bending, soldering, adhesive-curing, solder-preforming, and butt-welding. The tool uses quartz encapsulated heating elements, which open and close to surround the work piece for quick and even heating. The elements are available in sizes from ½" to 3" OD and produce instant radiant heat at temperatures up to 1500°F. It also heats without blowing hot air and is silent in operation. The unit has no RF interference and is generated with heating elements for use in cleanrooms and testing areas.
ERASER, SYRACUSE, NY
www.eraser.com
WIRE AND CABLE STRIPPER
The 3751 wire and cable stripper is intended for stripping the ends of a harness after assembly, stripping the conductors of a multi-conductor cable, and stripping pre-cut leads or coaxial cables. It accommodates wire sizes from 6 to 30 AWG, plus various sizes of coaxial cable. Strip lengths are adjustable from ⅛" to 1 ⅜" full strip and ⅛" to 3 ⅛" semi-strip.
EUBANKS ENGINEERING, ONTARIO, CA
www.eubanks.com
ENCLOSURES AND RACKS
 |
These cable-management solutions are available for commercial network installation, data centers and riser systems, telecommunications closets, horizontal wiring, and workstations in single buildings or campus networks. These floor- and wall-mount enclosures and racks are available in a variety of standard and custom designs. The line also includes numerous mounting, cable, and patchcord management options and accessories.
BELDEN CDT NETWORKING, FORT MILL, SC
www.BeldenIBDN.com
