D-SUBMINIATURE CONNECTORS
 |
These D-subminiature connectors now offer a vertical press-fit version, joining the SMT and through-hole-reflow (THR) versions of its right-angle male and female D-subminiature connectors. These connectors are available in a 6.3-mm format with 9, 15, 25, or 37 positions. The contacts are plated in the mating area to meet IEC 807-3 / DIN 41652 requirements and tin-plated in the termination area. The front metal shield meets EMC requirements. These connectors are suitable for conventional tin/lead applications, as well as for lead-free applications.
ERNI, ADELBERG, GERMANY
www.erni.com
ARINC CONNECTORS
 |
These EPXB connectors are designed for galleys and galley inserts according to ARINC 810, and will be installed in the galley of the two most recent commercial aircraft, the A380 and the B787. The EPXB comes with a rack-and-panel concept, a standard slim-line connector with alignment pin for use on galley inserts, such as coffeemaker and oven; a spring-loaded, float-mount connector with self-alignment design; and a lightweight composite strain-relief backshell.
RADIALL, TEMPE, AZ
www.radiall.com
POWER CONNECTORS
 |
These Z1 power connectors satisfy the PICMG 3.0 specification, also known as AdvancedTCA. These connectors combine high-conductivity materials with precision-formed,selectively plated contacts to produce high-current carrying capability. These connectors offer four sequencing levels, which include a first-mate power/ground pin and a last-mate enable/signal pin, and are rated for 250 durability cycles. The backplane version meets international safety standards for “touch-safe” applications. Both the backplane and linecard versions are fully intermateable and interchangeable with the existing power connector defined in the PICMG 3.0 standard.
TYCO ELECTRONICS, HARRISBURG, PA
www.tycoelectronics.com
FIELD-ATTACHABLE CONNECTORS
 |
These Pico (M8) field-attachable connectors are IP67- and NEMA 6P-rated, and are offered in three- and four-pole male and female versions with screw terminals. The screw terminals facilitate assembly directly on machinery while eliminating the need for soldering. The cable OD is from 3.5 to 5 mm, and has wire gauges from 20 to 26 AWG.
LUMBERG, MIDLOTHIAN, VA
www.lumbergusa.com
CORDSETS AND RECEPTACLES
 |
These RJ-45 Ethernet/IP cordsets and receptacles offer PCB and IDT receptacle versions, as well as overmolded single- and double-ended bayonet-style cordsets. They are ideal for manufacturing facilities serving the food and beverage, automotive, and chemical industries; water-treatment plants for wastewater and municipal drinking water; and transportation hubs such as airports, bus stations, and rail stations. Ensuring optimum performance and decreasing the chances of failure, they are designed with one sealing surface. Overmolded cordsets allow plug-and-play and quicker installation. The bayonet-style latch receptacle ensures fast, easy connections and guarantees proper depth when mating.
MOLEX, LISLE, IL
www.molex.com
WATERPROOF CONNECTORS
 |
The Hydroconn AMR series III connectors meet the pit requirements for the water industry, but will also work where a watertight connection is required. These connectors and cable work to 1000 psi or approximately 2000’. These connectors are molded and come with a Hydraplas extruded cable jacket. Internally and externally bonded with a three-conductor, 22-AWG wire, other contact arrangements are available.
NICOR, HEALDSBURG, CA
www.nicorinc.com
CARD-EDGE CONNECTORS
 |
These x16 vertical PCI Express card-edge connectors have an integrated retention arm for PCI Express graphics cards. The flexible arm extends away from the end of the connector body and includes a molded post that snaps into a notch on the bottom of the add-in card. The post engages with the hockey-stick-shaped hook defined on the bottom of the graphics card. The latching-post locking mechanism restrains the graphics card in the vertical direction, preventing the card from backing out of the connector and protecting against electrical interrupts caused by system-level shocks and vibration.
FCI, ETTERS, PA
www.fciconnect.com
DIFFERENTIAL CONNECTORS
 |
The GbX E-Series connectors are an upgrade to the GbX platform, with reduction in crosstalk and scalable data rates greater than 10 Gbit/s. The connectors provide various density configurations for application flexibility. The GbX and GbX E-Series connectors include two-, three-, four-, and five-pair versions with densities from 27.5 to 69 differential pairs per linear inch, and additional power and guidance options. An L-Series version for low-speed signals is also available in the two-, three-, and four-pair configurations.
TERADYNE, NASHUA, NH
www.teradyne.com
BOARD-MOUNT CONNECTORS
 |
The CA-19HMSR-C-303 line of 19-position board-mount connectors have been developed to meet the increasing demand for high-definition audio and video. Using High Definition Multimedia Interface (HDMI) technology, it combines high-definition video and multi-channel audio into a single digital interface to provide clear digital quality.
CIRCUIT ASSEMBLY, IRVINE, CA
www.circuitassembly.com
CONNECTOR FAMILY
 |
The Serial Advanced Technology Attachment (SATA) connector family aims to reduce size, increase transmission speed, improve data reliability, and facilitate use for optical and hard disk drive (HDD) applications. The connector components were designed on a 1.27-mm in-line contact pitch, and were designed to interface with standard 2.5" and 3.5" HDDs.
3M ELECTRICAL, AUSTIN, TX
www.3m.com
FINGER-PROOF CONNECTORS
 |
The Powerpole 15/45 finger-proof connectors are designed for user safety in applications where access to the energized connector is not otherwise protected, such as when the connector is unmated and energized. The Powerpole’s flat-wiping contact system reduces contact resistance at high currents, while the wiping action cleans contact surface during connection/disconnection. Low-detent contacts are also available for applications requiring low insertion/withdrawal force. Contacts are available reeled and in loose-piece designs to support all product needs from engineering prototypes to low- and high-volume products.
ANDERSON POWER PRODUCTS, STERLING, MA
www.andersonpower.com
NANO-MINIATURE CONNECTORS
 |
The metal Bi-Lobe nano-miniature connector line mimics the older, larger Micro-D connectors, but at reduced size and weights. Formats range from wire-to-wire interconnects to SMT and flex-mounting configurations. Sizes include 9-, 15-, 21-, 25-, 31-, 37-, 51-, and 65-pin counts, all at 25-mil pitch. The Bi-Lobes are designed for use in military aircraft, Patriot unmanned vehicles, space robotics, and gyro systems. They are also used in medical instrumentation, as well as part of portable electronics systems.
OMNETICS CONNECTOR, MINNEAPOLIS, MN
www.omnectics.com
IN-LINE CONNECTORS
 |
The HydraLink in-line butt connectors for multiple wires enable users to put two wires in one end and a single wire of the same gauge in the other end, and then crimp-and-seal for durability and protection. The tubing has an active adhesive that seals between multiple wires. The color dash on the tubing indicates the wire gauge for the connector. These connectors may serve as a replacement for temporary, unsealed quick-taps.
WAYTEK, CHANHASSEN, MN
www.waytekwire.com
BUS STRIPS
 |
These multi-tap bus strips are available with either four or eight GPIB receptacles wired in parallel, and are housed in a fully shielded, heavy chrome, steel box. These bus strips create a more organized GPIB system layout by eliminating connector stacking and facilitating cable-assembly changeovers. They are supplied with rubber feet for rest on any flat surface, and include optional mounting brackets. A 3.5" × 19" rack-panel and four-position I/O styles are also available.
L-COM, ANDOVER, MA
www.l-com.com
FIBEROPTIC CONNECTORS
 |
These EM-RJ duplex connectors are part of a space-saving new generation for LAN field and industrial use. They are designed with 2.5-mm ceramic ferrules for multimode, single-mode, and APC applications. These connectors are designed for harsh industrial environments, and the housings of the existing copper elements can be used for adapters and connectors.
EUROMICRON, FRANKFURT, GERMANY
www.euromicron.de
DISPOSABLE CONNECTORS
 |
The MEDCONX 14-pin/10-conductor disposable cable with Universal Smart Connectors incorporate Smart Block technology to cost-effectively solve time- and labor-intensive assembly of fine wire terminations of multiple-wire cables into connectors. The connectors integrate value-added electronic components and other intelligent, micro-scale systems into the connector plug. Smart Use-Limiters can be designed to control instrument usage to prevent unwarranted recycling.
MEDCONX, SANTA CLARA, CA
www.medconx.com
