REWORK STATIONS
The RD-500 Series II rework stations offer new design features to make rework and repair of lead-free components and connectors more efficient. The RD-500 adds “dual-point auto profiling,” which provides closed-loop temperature control between the top of the component and the ball/pad junction to minimize thermal change. This additional thermal control point is unique to the RD-500 Series II system and is a result of close customer collaboration on lead-free rework applications.
FOCAL SPOT, SAN DIEGO, CA
www.focalspot.com
HOT-AIR SYSTEM
The WHA3000PS hot-air system for demanding PCB rework operations is a 700-W hot-air station with a built-in pump, a WBH3000S circuit-board holder with pivoting stand, and a WHP3000 heating plate. Features include advanced digital control technology for maximum process control and user-friendly operation. A variable speed-controlled turbine generates an air volume of up to 50 liters/min. An ion trap directs ESD-safe hot air at the component. Process repeatability is ensured with memory space to store up to ten thermal profiles.
COOPER HAND TOOLS, APEX, NC
www.cooperhandtools.com
WIRE-PROCESSING MACHINE
The Primo SLT wire-processing machine is suitable for dual-end wire processing. Fully programmable, features include two process stations on side A of the machine, a wire-doubling option for side B, programmable swing arms, wire overhang and insertion, and a 2-m motorized collection conveyor with trough. This second-generation Primo SLT also supports optional equipment and processes, such as terminating and/or flux and tinning on side A of the machine.
MEGOMAT, PEWAUKEE, WI
www.megomat.com
TUBING CUTTER
The RTC1 manual-feed rigid tubing cutter processes material from 3/32” to 1/2”. Offering production flexibility and an unlimited cut length, the RTC1 can accommodate material types such as copper, aluminum, and mild steel. Easy to use and set up, the RTC1 is an ideal solution for rigid tube cutting.
ERASER, SYRACUSE, NY
www.eraser.com
CONNECTOR CLEAVER
The COMET non-contact, laser-based cleaver is dedicated to automated cleaving of fiberoptic connectors. The COMET will augment the existing Gemini-Cx processing cell, which integrates polishing, cleaning, and inspection in a single manufacturing platform for low-cost production of simplex and multifiber optical connectors.
SAGITTA, HAUPPAUGE, NY
www.sagitta.com
DIGITAL VALVE POSITIONER
The PMV D3 digital valve positioner has recently added FOUNDATION Fieldbus support and gained ATEX EEX approval as an explosion-proof device. The high-performance D3 is designed for linear and rotary valve control. It has applications in a variety of industries and processes, including oil and gas production and refining, pulp and paper, and food processing. With an onboard microprocessor, the PMV D3 offers auto-calibration, digital control of valve-flow characteristics, password protection, process diagnostics, alarm settings, and multi-language menus.
FLOWSERVE, DALLAS, TX
www.flowserve.com
FIBEROPTIC POLISHER
The SpecPro 4L fiberoptic polisher yields single-mode performance for R&D and medical applications, low-volume cable-assembly production, and field environments. It simultaneously polishes up to four components, including industry-standard connectors, multi-fiber ferrules, MIL/Spec termini, optical bundles, endoscopes, and bare fibers. It also can repair and retro-polish damaged connectors. SpecPro incorporates an independent suspension feature for uniform and consistent polishing at each connector position. The SpecVision video inspection system can also interface with SpecPro for in-line viewing of fiber finishes.
KRELL TECHNOLOGIES, MORGANVILLE, NJ
www.krelltech.com
X-RAY INSPECTION SYSTEM
The X8051 MXI/AXI inspection system combines X-ray technology with optical sensors for fully automatic X-ray inspection, as well as inline and off-line operation. Inspection tasks include typical faultdetection on SMD, BGA, and THT components, and lead-free-soldered joints with dimensions up to 560 × 710 mm. AXI image-field dimensions range from 4 × 5 to 15 × 21 mm. A rotating conveying mechanism inspects objects in all perspectives up to 70°.
VISCOM USA, NORCROSS, GA
www.viscomusa.com
OPTICAL DISPERSION ANALYZER
The 86038B is a solution for test and validation of critical optical devices, such as 10- and 40-Gbit/s DWDM components and fibers, and allows high-throughput manufacturing testing and design verification of photonic devices and specialty fibers, enabling high-bandwidth networks at reduced investments. The 86038B simultaneously tests all optical-component parameters, such as spectral- and polarization-dependent loss, group delay, and differential group delay, including second-order polarization mode dispersion.
AGILENT TECHNOLOGIES, PALO ALTO, CA
www.agilent.com
WELDING SYSTEMS
These new modular distribution systems have been designed for electrical-resistant preheat- and heat-treating welding applications, offering the flexibility of a range of solutions, including: U.S. Navy three- and four-wire systems with a percentage timer; commercial percentage systems (mini-systems for preheat); thermostatically controlled factory mutual (FM) systems; and commercial system “A” (CBI) and commercial system “B” (JBB) thermostatically controlled FM systems. The Mini-System is a line-voltage resistance heating system that is suitable for preheating plates, spheres, vessels, and other weldments.
DURALINE, ISLANDIA, NY
www.jbn-duraline.com
HYDRAULIC CRIMPING TOOLS
The 1370 and 1387G3 compact, heavy-duty hydraulic crimping tools use interchangeable, hexagonal die sets, which can be changed in seconds. The 1370 tool is battery-powered with a 3-A/hr Ni-Mh battery, delivering long running times. The 1387G3 6-ton hand tool delivers crimping power with molded handles for operator comfort.
ANDERSON POWER PRODUCTS, STERLING, MA
www.andersonpower.com
