ELASTOMERIC CONNECTORS
 |
Elastomeric connectors consist of fine gold or alloy wires with standard conductor densities reaching 250 per in. These conductors are incorporated with silicone rubber in various configurations according to the requirements of each application. Custom contact patterns and stock from a variety of silicone formulations are available to deliver a custom connector specifically tailored to unique applications. The connectors provide many advantages as devices continue to require smaller and lighter components, and can be found in cell phones, flight data recorders, radar systems, test equipment, medical devices, automobiles, and a variety of other challenging applications.
Z -AXIS CONNECTOR, WARMINSTER, PA
www.zaxisconnector.com
COMBINED MODULES
 |
In accordance to IEC 61076-4-101, the har-bus HM combined module integrates different HM female connectors in one single piece. Any combination of HM types A, B, AB, and C is possible up to 6 U in length. The combined module is designed to be used with the CompactPCI standard. The connector consists of five signal contact rows and provides a maximum of 535 contacts. It is available both shielded and unshielded, and is fitted with press-in contacts.
HARTING, ELGIN, IL
www.harting.com
WATERPROOF CONNECTORS
 |
The FirePower Systems connectors and plugs have been designed to eliminate GFI trippings and provide safe electrical power. Engineered to withstand rough conditions and severe weather, these connectors and plugs can be customized for specific applications, such as emergency power, temporary lighting, electrical machinery, and controls. When fully mated, the FirePower Systems are watertight and can block the intake of water when submerged in up to 6 ft. of water. They also prevent water from reaching electrical contact areas when subjected to high water pressure. The connectors are also crush-proof and designed to remain intact.
DURALINE, ISLANDIA, NY
www.jbn-duraline.com
GROUNDING CONNECTORS
 |
The mechanical grounding-/power-connectors line is ideal for direct burial applications in earth or embedment in concrete. The connectors are made of high-copper-content alloys, and use a nut-and-bolt design to provide a means for connecting copper cable to many applications. In addition, the connectors are designed for easy installation and durability.
FCI-BURNDY, MANCHESTER, NH
www.fciconnect.com
MINI-DIN CONNECTORS
 |
The 5145P3 series PCB-mount mini-DIN connectors are now available with a full metal shield and EMI gaskets on the mounting face for EMI suppression. Available in three- to eight-pin configurations, the gasket option for the mini-din connectors is the same one used on the patented RJ-45 connector line. The connectors incorporate high-temperature material in the housing, and come in a RoHS-compliant configuration. The mini-DIN connectors provide easy-to-identify pin configurations for applications that require multiple mini-DIN connectors on a single PC board or device.
REGAL ELECTRONICS, SUNNYVALE, CA
www.regalusa.com
PLASTIC CONNECTORS
 |
A new version of plastic connectors has been developed by adding metal housing. They feature more than 1,000 mating cycles with a robust housing version. Receptacles, for front-, rear-, and front-or-rear panel assemblies are available and come in seven color-coding forms. The plastic connector in metal housing is a cost-effective alternative to metal push-pull connectors.
ODU CONNECTOR SYSTEMS, MÜHLDORF, GERMANY
www.odu.de
SOCKETS
 |
This IDB 1394 socket complies with the new PCB footprint and has a metal shell for providing EMI. The socket is intended to mate with a plastic, optical-plug cable assembly. This connector system is able to operate at S200 (250 Mbit/s) speeds up to 50 m. This system, in conjunction with the custom convenient port (CCP) in copper, can support a full implementation of an automotive topology.
ELECTRONIC LINKS INTERNATIONAL, BINGHAMTON, NY
www.electronic-links.com
TWO-PAIR CONNECTORS
 |
The GbX two-pair connector is designed for high performance within a small footprint. The connector features 27.5 real differential pairs per linear in. to fit compactly into a 15-mm slot pitch. The connector provides enhanced signal integrity with 100-Ω matched differential impedance and crosstalk under 5% at a 50-ps rise time (20 to 80%). A modular design allows for easy configuration in conjunction with low-speed signals, guidance, and power modules. The GbX is suited for designs with tight slot-pitch restraints, such as those in the blade server market.
TERADYNE, NASHUA, NH
www.teradyne.com
AUTOMATION CONNECTORS
 |
These M12 automation connectors have now been expanded to include a four-pin version with D-coding. These connectors can be used to implement a flexible I/O or field-bus connection on the circuit board. M12 connectors with D-coding meet IEC 61067-2-101, Amendment 1. Traditionally used to connect sensors and actuators in automation systems, the modular design concept makes it possible to produce connectors in different designs and versions. The black insulator is made of high-temperature-resistant plastic, and is suitable for soldering with typical SMT procedures.
ERNI, MIDLOTHIAN, VA
www.erni.com
PUSH-WIRE CONNECTORS
 |
The recently expanded WALL-NUTS 773 series of push-wire connectors is designed to meet increasing demand by electrical contractors and consumers for a cost-effective, highly dependable, 10-AWG connector that offers a safer, more flexible alternative to traditional twist-wire connectors. Wiring time is reduced up to 50% because no twisting and taping is required. The transparent housing allows for visual confirmation of the connection, ensuring greater reliability and reduction in expensive troubleshooting and warranty work.
WAGO, GERMANTOWN, WI
www.wago.com
ADAPTER KITS
 |
Two new Unidapt universal adapter kits have been designed for technicians who work with WiFi and broadband systems. Both the RFA-4018-WIFI and the RFA-4028-WIFI kits contain an assortment of 30 universal adapters, including male and female MMCX, N, Reverse Polarity TNC, Reverse Polarity SMA, N, TNC, BNC, and SMA connector interfaces. By joining two adapters using a universal center, coaxial adapters can be made with any combination of these interfaces. Features include Teflon insulation, silver-plated machined brass bodies, gold-plated contacts, and low VSWR performance.
RF CONNECTORS, SAN DIEGO, CA
www.rfindustries.com
CARD CONNECTORS
 |
This low-profile, memory-card connector, measuring 2.2-mm high, accepts miniSD cards and are ideal for portable equipment, including mobile phones, mobile terminals, and PC peripherals. Safety features include a card inserted in reverse-prevention function, a card fly-out brake function, and a locking function for card drop-off prevention. The card insertion/removal system is a push-insert and push-eject type. Major specifications of the connector are a voltage rating of 125 VAC, contact resistance of 100 mΩ maximum, insulation resistance of 1,000 mΩ minimum, and a 10,000-cycle life.
SMK ELECTRONICS, SAN DIEGO, CA
www.smkusa.com
CARD-EDGE CONNECTORS
 |
Designed to conform to PCI SIG specifications, the 6325 PCI Express card-edge connectors provide a 2.5-Gbit/s data transfer rate in desktop computers, communications equipment, workstations, and factory automation systems. Available in 36-, 64-, 98-, and 164-contact positions in 1.00-mm pitches, the one-piece, high-density connectors support different bandwidth requirements for 1.58-mm-thick, “add-on” graphics cards for user upgrades. 2.3- and 3.0-mm contact lengths are available to support differing motherboard thicknesses. Locating bosses ensure proper alignment to the motherboard, and an ejector latch is available to facilitate detachment. Tails are offset to form four rows on a 2.00-mm pitch.
AVX, MYRTLE BEACH, SC
www.avx.com
BUS-BAR CONTACTS
 |
The 120- and 350-A bus-bar contacts are part of the latest addition to its SB and Powerpole families of connectors. These contacts are used with 120, SB120, and SB350 connector families. These new, rugged bus-bar contacts attach directly to a copper bus, while offering a quick disconnect design that minimizes the expense of system assembly, replacement, or repair. The bus-bar contacts reduce assembly costs by facilitating the use of plug-in sub-systems and sub-system testing. Their efficient transmission of power makes them ideal for use in packed electronic cabinets.
ANDERSON POWER PRODUCTS, STERLING, MA
www.andersonpower.com
CABLE CONNECTORS
 |
NC**XX series XLR cable connectors are easy to assemble, simple to use, and are available in three- to seven-pole configurations. The compact-styled, die-cast shell has internal threads that mate with the external threads on the boot to eliminate damage sometimes found on exposed threads. The connectors have a chuck-type strain relief, and provide color-coding on the boot. Additional features include female cage-type contacts that increase conductivity and reduce wear of the male contacts, and a new ground contact that provides better integrity between the chassis and the connectors.
NEUTRIK, LAKEWOOD, NJ
www.neutrikusa.com
POWER CONNECTORS
 |
Recently expanded, the PCS power connector system series is now offered in various sizes, contact variants, termination styles, and accessories. New features include low contact resistance to 0.0007 Ω, increased current-carrying capability, hot-plug versions, safety-shrouded options, and screw terminations. The line also includes high-conductivity contact options that offer higher current ratings. Right-angle press-fit terminations and RoHS-compliant versions of the series are also available.
POSITRONIC INDUSTRIES, SPRINGFIELD, MO
www.connectpositronic.com
