MODULAR JACKS
 |
These new modular jacks are available in five new colors, as well as the standard black option. By choosing from orange, green, blue, gray, and yellow, each modular jack can be customized to match the color of a cable assembly to prevent mismating and increase design flexibility. Available in three configurations-a right-angle version with an ultra-low profile, a SMT version, and an inverted version with a top latch jack-the modular jacks meet several different design requirements. They are easily identifiable and well suited for a variety of network system, consumer, and office-/home-equipment applications. MOLEX, LISLE, IL
www.molex.com
DIRECT-MOUNT CONNECTORS
 |
The Insulated Multiple Tap connector (UNITAP) line has been expanded to include a mount version. Ideal for the contractor, maintenance, and repair markets, the mount version further enhances the versatility and laborsaving nature of the UNITAP line. They are pre-insulated aluminum multiple-tap connectors for line splice, reducer, and tap applications. They are dual-rated for copper and aluminum applications, with multiple configurations that accommodate a variety of applications. FCI-BURNDY, MANCHESTER, NH
www.fciconnect.com
WIRE-HARNESS CONNECTORS
 |
This new line of sealed headers and associated wire-harness connectors is ideal for electronic-control-unit designs in the commercial vehicle market, specifically for on-highway, agricultural, construction, mining, and recreational applications. The mating harness connectors offer features that simplify the harness assembly process. The connectors include push-to-seat terminal technology, tangless terminals, and secondary locking. Available in 18 and 30 positions, the SHS harness connectors are offered with various keying and color configurations. CINCH CONNECTORS, LOMBARD, IL
www.cinch.com
USB CONNECTORS
 |
The new USB mini B connector allows portable devices to communicate and share data without the need of a PC connection. This high-speed, ultra-miniature connector has been created for USB on-the-go devices in the USB 2.0 market, specifically for the consumer, portable, and wireless electronics markets. The USB mini-B connector features surface-mount contacts, full shielding, and an arched lead-in. RIA CONNECT, TINTON FALLS, NJ
www.riaconnect.com
ANGLED RJ-45 CONNECTORS
 |
The MaxJack family of RJ-45 angled connectors comes with a straight design and integrated magnetic filter components configured for IEEE 802.3-compliant applications, such as Gigabit Ethernet or Power-over-Ethernet (PoE). The RJ-45 MaxJack connectors target high-speed telecommunications and data communications applications in data-storage devices, personal computers, network printers, and peripheral equipment, as well as industrial applications. MaxJack components are available in single-port and multi-port versions in ganged and stacked configurations. ERNI, ADELBERG, GERMANY
www.erni.com
PLASTIC CONNECTORS
 |
Due to the demand for thermoplastics in the connector industry, the conductive- and static-dissipating-plastics product line now includes plastic connectors. The new Black Beauty (B2) line uses a type of plastic that dissipates static electricity to protect electrical components from permanent harm. The B2 plastic connector provides protection against static accumulation, electrostatic discharge, and electromagnetic interference. Applications include electronic connectors, mounting hardware, component carriers and trays, and structural components, such as brackets and housings. CONNECTORS UNLIMITED, PAINESVILLE, OH
www.connectorsunlimited.com
PUSH-PULL CONNECTORS
 |
Generally stainless steel, and designed for robotic applications, N series connectors have a number of features to benefit customers working in applications where the location or environment requires a robot, often called a telemanipulator, to make the connection. These telemanipulators come in low- and high-power units. The N series connectors have special features on both types of units. For small and low- power robots, a special lever reduces the mating force of connections. These features will make the remote connection job easier with no-turn, push-pull connections, and reduced operator stress. LEMO USA, ROHNERT PARK, CA
www.lemousa.com
BNC CONNECTORS
 |
A new right-angle, circuit-board BNC jack connector using a metal-molding technology called Zamak offers the same electrical and mechanical performance as standard BNC connectors at a lower cost. The connectors are available in 50 Ω, and feature a low return loss of 28 dB at up to 1.5 GHz. The Zamak BNC connectors are also highly solderable through selective tin plating of the legs and the center contact. RADIALL, TEMPE, AZ
www.radiall.com
DATACOM CONNECTORS
 |
Featuring the RADSOK technology, the Amphe-PD connector series is a terminal with a stamped hyperbolic grid, providing low insertion force, high amperage, high reliability, and a longer cycle life. The Amphe-PD connector series is suited for datacom and many other applications. The Amphe-PD solution is UL-listed at 69 A and CSA-listed at 55 A. The Amphe-PD series features a single-position RADSOK with a molded socket shell or a dual-position, TUV “touch-proof” with a V0 rating. In addition, the RADSOK in the Amphe-PD supports 50- to 70-A continuous duty. AMPHENOL INDUSTRIAL OPERATIONS, SIDNEY, NY
www.amphenol-industrial.com
POWER DIVIDER/COMBINERS
 |
The V-Line family of compact, high-performance Wilkinson power divider/combiners cover wireless bands between 0.800 and 2.200 GHz. They are ideally suited for wireless systems applications, such as cellular and UMTS. 14 models are available in 2-, 3-, 4-, 6-, 8-, and 12-way configurations in both plated brass N-female and stainless SMA-female connector styles. Applications will benefit from improved isolation, VSWR, phase and amplitude balance, and reduced insertion loss. Mechanical features include gold-plated contact pins, virgin electrical-grade PTFE insulation within the connectors, and a rugged aluminum housing to minimize RF EMI. MECA ELECTRONICS, DENVILLE, NJ
www.e-meca.com
CONNECTOR SYSTEM
 |
The new board/harness-to-PCB connector system cuts installed cost and saves board space versus conventional pin-and-socket designs. The electronic-control-unit (ECU) system is a modular, landed contact system that features a plug assembly. Power and signal contacts are encased in a custom housing. A latching system within the housing ensures secure and reliable mating to the PCB. Designed for automotive applications, the ECU connector is designed to mate directly to an engine management system, which can be mounted directly on an engine, meeting all rugged environmental requirements of USCAR and SAE J 2030. ITT INDUSTRIES, CANNON, NEWTON, MA
www.ittcannon.com
MICROMINIATURE CONNECTORS
 |
The new microminiature SMP series connectors offer design engineers efficient electrical performance in a small package size, along with blind-mating capability. In blind-mate applications with multiple connector pairs, these SMP connectors allow for as much as 0.010” misalignment of mating connectors without damage when engaging. An optional “catcher’s mitt” configuration can extend the misalignment tolerance to 0.020” (radially). Current configurations include straight and right-angle cable connectors, panel shrouds for use with hermetic seals, several lengths of “bullet” adapters, and panel-mounted cable connectors (including snap-in types). APPLIED ENGINEERING PRODUCTS, NEW HAVEN, CT
www.aep.us
DUAL-STACK CONNECTORS
 |
A new metal-body, dual-stack BNC connector combines the space-saving efficiency of a stacked design with the proven reliability of the time-tested BNC configuration. The twisting “snap-lock” design of the BNC connector has made it a preferred option for applications such as test equipment, radio-frequency patch panels, and lab instrumentation where a strong and reliable physical connection is important. The BNC 31202-HM series connector has a metal body for strength and shielding, and is available with an impedance of either 50 or 75 Ω. REGAL ELECTRONICS, SUNNYVALE, CA
www.regalusa.com
COUPLING CONNECTORS
 |
Designed for antenna connections, and compliant with FCC-regulated part no. 15.203, these coupling connectors can be custom-designed for a specific application, a modified version of a standard connector interface, or a “standard” reverse-polarity interface. Flange-mount, crimp, and compression cable mounts can be used with interfaced connector pairs to preclude the possibility of erroneous component mismating. “Coded” pairs can also be fabricated. AVIEL ELECTRONICS, LAS VEGAS, NV
www.avielelectronics.com
PCB-MOUNT JACKs
 |
The UCBJ250S-5-N is a newly designed PCB-mount jack, an addition to the M-BNC connector series. The patent-pending M-BNC Series addresses the issue of reducing size of OEM equipment by enabling a 40% increase in connector density. These products provide an ideal solution for high-reliability, high-data-rate, and high-frequency applications, such as telco Central Office DS3 and other Carrier Class applications. Matched to telco industry-standard BNC installation tools, this space-saving series does not require re-tooling or training for the cable side of the interconnect mated pair, and delivers frequency response over an extended bandwidth. TROMPETER, WESTLAKE VILLAGE, CA
www.trompeter.com
NON-MAGNETIC CONNECTORS
 |
Because magnetic properties of connector components can obscure the results of MRI scans, a range of high-performance, non-magnetic connectors have been designed for use in MRI environments. Depending on how close the connector is to the imaging volume, devices will require varying degrees of non-magnetic behavior. By careful selection of contact and housing materials, the connectors can now be offered with non-magnetic properties to suit the requirements of medical equipment customers. HYPERTRONICS, HUDSON, MA
www.hypertronics.com
CONNECTOR FAMILY
 |
The PowerMod high-power (HP) connector family features touch-safe female housings, integral positive latches, and cable strain relief. The PowerMod HP connector is rated to 125 A at a 30° temperature rise, and may be used in appropriate applications to 175 A. The product accommodates American wire sizes from 6 to 2 AWG and metric wires from 16 to 35 mm. These connectors use patented sterling contact technology that offers low electrical resistance, provide a minimum of 500 mating cycles, and are rated for circuit interruption (true hot-plug). ANDERSON POWER PRODUCTS, STERLING, MA
www.andersonpower.com
LOW-PROFILE CONNECTOR
 |
The Aptera low-profile connector offers a space-saving solution for server, storage, and networking applications. The connector’s design addresses difficult packaging challenges by balancing high-speed interconnection with the need to conserve board space and maximize airflow. The connector’s 10-mm slot pitch offers flexibility for applications that need high-performance connectors in tight spaces. Electrical test results demonstrate transmission characteristics with a cross talk of less than 2% at a 50-ps rise time (20 to 80%). Combined with a matched impedance interface and zero skew, the Aptera connector platform is scalable for future system design requirements. TERADYNE, NASHUA, NH
www.teradyne.com/tcs
