SNAP-IN CONNECTORS
 |
Model 540-SS Snap-in FMC connectors are designed for use with steel or aluminum-flexible metal conduit. The 3/8" trade size (1/2" K.O. size) connector eliminates the need for locknuts, thereby reducing installation time. These connectors are ideal for electrical whips, and the low-profile connectors are constructed of hardened spring steel with four locking tabs to assure positive holding ability. BRIDGEPORT FITTINGS, STRATFORD, CT www.bptfittings.com
NON-SOLDER CONNECTORS
 |
The QMA EZ non-solder connectors for LMR-240 low-loss coaxial cable are a new "snap-on" version of the SMA interface, which has gained popularity with many OEM's for use on indoor interconnect cables. The new connectors are available in both straight and right-angle versions. The straight version is designated EZ-240-QMAM (3190-1533) and the right-angle version is EZ-240-QM-RA (3190-1539). TIMES MICROWAVE SYSTEMS, WALLINFORD, CT www.timesmicrowave.com
PLUG CONNECTORS
 |
With the new SpeedCon connection system, a simple "1/2 turn" makes a secure, watertight, and vibration-proof connection between cordsets and devices. Compatible with all standard M12 connectors on the market, SpeedCon reduces the time it takes to connect an M12 threaded plug connector by up to 90%. No special adapters are required making SpeedCon backwards, forwards, and future compatible. SpeedCon plug connectors fulfill the same requirements for electrical and mechanical properties as the classic M12 plug connector systems. The product range offered includes IP65 and IP67 cordsets, field wireable, panel-mount connectors, and sensor-actuator boxes. PHOENIX CONTACT, HARRISBURG, PA www.phoenixcon.com/speedcon
ETHERNET CONNECTORS
 |
A full range of highly rugged RJ45 Ethernet connectors have been targeted for diverse, harsh-environment applications. These connectors are ideal for applications such as automation bus networks in petrochemical, food processing, railway network systems, outdoor and indoor civilian and military field data systems, and ground avionics. These CAT 6 and CAT 5E performance connectors are waterproof to IP67 and deliver IK10 shock resistance. They are IDC terminated and require no tooling. They feature 360º CEM shielding with a rear metallized cap that allows manual assembly. Secure plug-end locking helps prevent undesired disconnection. ITT INDUSTRIES, CANNON, WHITE PLAINS, NY www.ittcannon.com
MODULAR CONNECTORS
 |
RCA modular connectors allow more customizable wall outlet solutions for home theaters. These new high-performance connectors provide a clean connection point for wired electronics to wall outlets allowing cables to be hidden within the walls or cabinetry. They provide for good signal quality with minimal noise for component or composite video and audio systems. The new RCA modular connectors come in two termination styles, RCA to coaxial F-connector and RCA to RCA. They are available in red, green, blue, black, white, and yellow, and come in four body colors: almond, black, ivory, and white. ICC, CERRITOS, CA www.icc.com
CONNECTOR SYSTEM
 |
This new connector system is a complete, compact solution designed for cellular phones, PDAs, retail scanners, bar code readers, GPS devices, pen notepad computers, human and vehicular tracking devices, portable medical and industrial devices, and more. With a 0.80-mm (0.031") pitch, the HandyLink connector system offers higher current capabilities. It can carry a continuous current of 1.5 A, with the ability to carry up to 3 A depending on the circuit configuration. This one-stop system solution is available in a right angle SMT receptacle version and both wire and PCB plug versions that are well suited for wire-to-board applications or board-to-board applications. MOLEX, LISLE, IL www.molex.com
DISPOSABLE CONNECTORS
 |
A new line of disposable connectors, the Redel disposable connector series, are specialized connectors designed to ensure quality performance in medical applications, yet are economical enough to justify single-use. Designed for volume medical applications, they are ideal for use in a wide range of medical applications. They are EtO and gamma radiation sterilizable and have a simplified latching mechanism. Its stamped contacts deliver an innovative cost-effective solution. The contacts are first soldered and then snapped in, allowing for easier termination without the need for cleaners. LEMO USA, ROHNERT PARK, CA www.LEMOusa.com
DISTRIBUTION ASSEMBLAGE
 |
This complete line of watertight connectivity products was designed to meet the harsh demands found within the food and beverage processing and packaging industries. These products use high-grade stainless-steel hardware, PVC inserts, and cable jacket with overmolding. Rated at IP 69K, each product is produced with smooth surfaces to avoid build-up of residue and bacteria, and can withstand the daily use of aggressive cleaning agents and high pressure or steam jet cleaning. The line consists of an array of passive and active distribution boxes, single- or double-ended cordsets, field attachable connectors, and receptacles. LUMBERG, MIDLOTHIAN, VA www.lumbergusa.com
WATERPROOF CONNECTORS
 |
The latest extension to the Bucaneer range of waterproof Ethernet connectors is an overmolded version of the pre-wired patchcords. The Ethernet Buccaneer provides environmental sealing to IP68. Combining industry standard RJ45 connectors with Buccaneer characteristics, this connector system provides a secure, reliable, and practical solution to harsh industrial environments. BULGIN COMPONENTS PLC, ESSEX, UNITED KINGDOM www.Bulgin.co.uk
ESD CONNECTORS
 |
This new line of ESD filter composite connectors for circular, rack and panel, and D-Subminiature receptacles offer the best protection against EMI and ESD environments. The new connectors are ideal for power-management systems, video processing equipment, and military fighter jet applications. ESD connectors benefit from a faraday cage, which protects the components inside the connector from electrostatic discharges. A composite material shell increases durability (up to 1,500 cycles) and is able to resist severe corrosion of up to 2,000 hours of salt spray. The new connectors meet applicable protection requirements of IEC 801-2 and MIL-STD-1686. SABRITEC, IRVINE, CA www.sabritec.com
SMT PLUG CONNECTOR
 |
The packaging options of the internal microGiGaCN (FCN-260) mezzanine connector has expanded its offering by releasing a high-speed differential signal, right-angle SMT plug connector. With this latest addition, the microGiGaCN series now accommodates co-planar and perpendicular board-to-board connections, in addition to 8 mm through 14 mm stacking (mezzanine) applications. The new FCN-268M***-G/*D right-angle plug provides a cost-effective, high-speed internal interconnect for high-end and low-end servers, networking, medical, and test equipment. FUJITSU, SUNNYVALE, CA www.fcai.fujitsu.com
SC CONNECTORS
 |
These new single-mode SC connectors have an enhanced design that optimizes performance on 1.6- to 2.0-mm cable. The 1.6-mm SC jumpers have been tested to Telcordia GR-326, Issue 3; Service Life-Part A, using standard match-cladding fiber. The new connectors also incorporate a six-position tuning feature that optimizes fiber alignment and performance: Combined with the enhanced uses, it allows the connectors to easily meet both the requirements and objectives of Telcordia GR-326. TYCO ELECTRONICS, HARRISBURG, PA www.tycoelectronics.com/fiberoptics
SMP CONNECTORS
 |
Designed for military applications—phased arrays, active antennas, satellites, airborne, shipborne, and ground radar—the SMP connectors were developed to help designers to reduce the size and increase the density on MIC (Micro Integrated Circuit) packaging. SMP connectors offer high performance up to 40 GHz, for 50-Ω RF and microwave applications with excellent vibration and shock performance. The SMPs have a snap-on or slide-on blind-mate interconnection system allowing axial (0, + 0.25 mm) and radial (± 0.25 mm) misalignment, and are compliant with MIL-STD-348A and MIL-PRF-39012, DESC 94007/ 94008 standards. RADIALL, TEMPE, AZ www.radiall.com
STRADDLE-MOUNT CONNECTORS
 |
The new straddle-mount card edge connectors support the implementation of high-speed, serial PCI Express architecture in desktop PCs and servers. The straddle-mount connector's primary use is expected to be on test cards used for validation of PCI Express platforms and add-in cards. However, the connectors can also be used to facilitate connections between coplanar circuit boards. The connector series offers 1, 4, 8, or 16 high-speed serial PCI Express lanes to match different bandwidth requirements. Each serial lane is comprised of differential transmit and receive signal pairs that support 2.5 Gbit/s data rate in each direction. FCI ELECTRONICS, ETTERS, PA www.fciconnect.com/pciexpress
WIRE CONNECTOR
 |
The 3M T/R+ wire connector comes from a line of 3M performance plus wire connectors. It replaces the yellow, tan, and red connectors in the majority of field applications. The compact design and red miniskirt gives you more room in tight spaces, where it is needed most. The torque wings provide a comfortable and secure grip for fast installation and easy back off. The quick bite spring design allows for easier installation. The wire connector is for use in the majority of field applications and has a wire range of 2 #18 up to 5 #12. WAYTEK, CHANHASSEN, MN www.waytekwire.com
CARD EDGE CONNECTORS
 |
The M-Series card edge connectors are a new line of surface-mount microminiature connectors designed to fasten to the edges of a PCB, preserving valuable board real estate for other purposes by shrinking the space required to house the interconnection assembly above the PCB. The series is available in sizes 9 to 100, and feature a uniquely shaped lead design that allows the connector to accept a wide variety of PCB thicknesses, with rugged stainless steel mounting brackets that mechanically secure the connection to reduce stress on solder joints. AIRBORN, ADDISON, TX www.airborn.com
RJ-11 CONNECTOR
 |
A new RJ-11 connector for the DSL market has recently been introduced called the Ultrakey. The Ultrakey connector has an integrated DSL filter chip in a Keystone style jack. The Ultrakey is designed to isolate the high-frequency DSL signal from the lower-frequency phone signal (POTS). The DSL Ultrakey provides filtering for all telephones fax machines, answer machines throughout the home or office, enabling them to operate on the same line being used for high-speed Internet connectivity. The DSL Ultrakey is designed to enhance voice-band quality, while at the same time isolate the DSL frequency for peak Internet performance. XMULTIPLE, SIMI VALLEY, CA www.xmultiple.com
Z-PLUGGABLE CONNECTOR
 |
The CN074 connector is a compression style z-pluggable connector for mezzanine cards with card-edge connections. The CN074 series connector family is designed for use with the high-speed hot-swappable Advanced Mezzanine Card (AMC). The connector has sections for power, low-speed signals, and 12.5-Gbit/s LVDS transmissions. Several options are available to allow all combinations of half-height and full-height (basic and extended) AMC modules to be plugged into either a conventional or cutaway ATCA carrier. YAMAICHI ELECTRONICS, SAN JOSE, CA www.yeu.com
