COAXIAL ASSEMBLIES
 |
As part of this family of high-frequency assemblies, VNA cable assemblies and Phaseflex microwave test assemblies are ideally suited for test applications, providing outstanding phase and amplitude stability. Available in frequency ranges from DC through 67 GHz, the assemblies use materials that improve flexibility, enhance radiation resistance, and are nonmagnetic, allowing the materials to be used in various combinations, depending on the application. w.l.
GORE, ELKTON, MD
www.gore.com/electronics
STANDARD MIL CONNECTORS
 |
Bi-lobe connectors are built to MIL-DTL-32139 design specifications. Key to their high reliability is the Mil-Spec performance of the "Omnetics Spring Pin" and socket system at 25 mil. pitch. A captive jackscrew system smoothly pulls the fully shrouded nickel-plated connector shells together, assuring scoop-pro to wire cabling with up to 30 AWG. Teflon stranded wires for highly flexible, miniature interconnections that can carry up to 1 A of current. Board-mount designs include a full range of SMT and Thru-hole configurations and a great "edge-mount" flex-circuit format. Pin counts range from 15 to 65 positions with custom sizes available.
OMNETICS CONNECTOR, MINNEAPOLIS
www.omnetics.com.
2-MM CONNECTOR
 |
The new hard-metric 2-mm connector har-bus HM 6-row offers an additional row of contacts but uses the same space on the daughtercard as a standard 5-row variant. All connectors have the facility for coding and the option of end walls, thus preventing contact damage. A guiding system aids pre-alignment of the daughtercard and the connector. The solderable connectors withstand highest temperatures and support lead-free process requirements. Signal transfer rates of up to 2.5 Gbit/s can be achieved per differential pair, similar to an aggregate bandwidth of 12.5 Gbit/s/cm.
HARTING, ELGIN, IL
www.harting.com
CIRCULAR CONNECTORS
 |
HyperGrip, from the family of high-reliability circular connectors, is designed and manufactured specifically for the medical industry. The user-configurable HyperGrip is color-coded, customer-keyable, and available in sealed and shielded configurations. The color-code and keying provide an easily recognizable system for accurate and quick connections on medical equipment. The sealing option on the HyperGrip offers IP67 protection when mated to prevent electrical shorts. The shielding feature supplies EMI/RFI protection against interference. Unique to HyperGrip is the front- or rear-panel-mount receptacle design. This feature allows the user to mount the harness assembly from inside or outside of case.
HYPERTONICS, HUDSON, MA
www.hypertronics.com
VOICE CONNECTORS
 |
The high-density 6P6C voice connector is designed to optimize space, allowing for an increased number of data connectivity at the work area. An extension of a new family of high-density products, the new HD voice connector is designed to fit together with all existing faceplates, including the new series of high-density furniture plates for home and office use. The HD voice connectors offer configuration flexibility, allowing them to be field-configurable and easy to snap in all HD-compatible faceplates and HD patch panels to maximize connectivity in tight quarters.
ICC, CERRITOS, CA
www.icc.com
DUST-PROOF CONNECTORS
 |
The enhanced 4M20 male plug and 4F20 female connector, now provide complete protection against dust and allow for continuous submersion in up to 6' of water when capped or mated. Duraline electrical products are available from 1 to 1,200 A, 12 to 5,000 V, and can be fitted with up to 20 contacts. The 4M20 male plugs and 4F20 female connectors are four-wire IP68-rated for 15 to 25 A, 600 V maximum.
DURALINE, ISLANDIA, NY
www.jbn-duraline.com
LC ADAPTERS
 |
These singlemode and multimode adapters are available with flange for standard applications or without flange for high-density applications and are compatible with all LC standard products. The LC quad adapter fits into a conventional SC duplex adapter cutout, doubling fiber density within existing network architecture. Likewise, the LC duplex adapter fits within a standard SC simplex adapter footprint. The LC Unibody features a unique one-piece design that significantly improves side-pull performance to meet the requirements of Telcordia GR-326-CORE.
SENKO, MARLBORO, MA
www.senko.com
ALIGNED KEY MTP/MP ADAPTERS
 |
This new product complies with the k=2 option specified in TIA/EIA 604-5 (FOCIS 5 A-2). Other standards specifying this adapter configuration include OIF-VSR4-03.0, 10-Gbit Fibre Channel, Type 1200-MX-SN4P-1, and InfiniBand 4X-SX and 12X-SX. The product is essential for any application that requires the end user to manage the polarity or otherwise deviate from the original key-up/key-down protocol of mating two MTP/MPO connectors. That is of particular importance in premises LAN/SAN installations. The aligned key configuration is available in the standard flanged version with screw-mount holes as well as a rotated tab version and reduced flange version.
US CONEC, HICKORY, NC
www.usconec.com
HARSH-ENVIRONMENT CONNECTORS
 |
This new line of RJ harsh environment connectors is mechanically, environmentally, and electrically rugged. These connectors have die-cast metal shells and are fully water-sealed in the unmated condition to IP67 requirements. In addition, they are available with EMI filtering as well as transient voltage protection for high-speed data lines to Belcore 1089 (Intra-building) 100A and IEC 61000-4-5 (Lightning) 100 A.
AMPHENOL, SCARBOROUGH, ONTARIO
www.amphenolcanada.com
HD-OPTYX CONNECTORS
 |
The new modular optical interconnect architecture is compatible with both MT-ferrule and 1.25-mm ceramic-ferrule technology. The HD-Optyx optical connector features an innovative modular architecture that facilitates more efficient layout solutions and flexibility to quickly scale to changing design requirements. Common components can be assembled into custom configurations quickly with no retooling required. The HD-Optyx connector works with both high-density MT-ferrule technology and mature, higher-performance 1.25-mm ceramic-ferrule technology. Designers can choose 1.25 mm for system compatibility or MT for density or use both in the same system. Applications include intra-system interconnect via backplane or front access.
TERADYNE, NASHUA, NH
www.teradyne.com
LOW-PROFILE CONNECTORS
 |
The new iCool Low Profile VRM connector enables vertical voltage-regulator modules (VRMs) in 1U servers. The iCool connector can be used with small-form-factor PCs and workstations. Incorporating a low loop inductance design, iCool was created specifically for high output currents at high slew rates. The iCool VRM connector is designed for VRM 10.0 applications, including VRM 10.2, and can handle up to 130 A of output current in 4" connectors. Designed for 1U server applications, optional versions are also available for 2U servers and larger platforms with ambient air temperatures up to 60°C.
MOLEX, SAN JOSE, CA
www.molex.com
FIELDBUS PLUG CONNECTORS
 |
New Fieldbus plug connectors for applications in harsh environments are available to provide protection against dirt and moisture, these D-subminiature plug connectors meet protection category IP67. No tools are needed to lock the plug housing to the mounting frame—it is a "plug and play" operation. That simplifies set up and maintenance, since connectors are easy to unplug, plug in, and move. Integrated EMC shielding protects against interference and allows for error-free data transfer up to 12 Mbit/s.
PHOENIX CONTACT, HARRISBURG, PA
www.phoenixcon.com
FINE-WIRE CONNECTORS
 |
The SMT fine-wire connector, an insulation-piercing connector (IPC), is designed for solid, stranded, and tinselwire terminations. The economical design of the connector saves labor time and assembly costs by simultaneously terminating four wires within a sturdy plastic housing, thus eliminating the need to solder wires to the PCB. Its design also reduces labor by building on IPC technology, which allows multiple wires to be terminated without first being stripped. The design offers the least expensive method for wire termination, using minimal PCB real estate to allow for more components on the board.
ZIERICK, MT. KISCO, NY
www.zierick.com
POWER-DRAWER CONNECTORS
 |
Two new 35-A Power Drawer connectors are used on "N + 1" power supply and rectifier systems for server, telecommunications, and network applications. The versatile Power Drawer connectors are UL-verified for cross-mating with competitive products, offering the designer and user development and sourcing options. The connectors can be configured with up to eight 16-AWG contacts and 21 20-AWG contacts or a combination of four 16-AWG contacts, four 12-AWG contacts, and 21 20-AWG contacts.
ANDERSON POWER PRODUCTS, STERLING, MA
www.andersonpower.com
CARD CONNECTORS
 |
The availability of a new interconnect for ExpressCard products specification was developed as the next-generation PC card by the PCMCIA standards organization. ExpressCard products will be compatible with advanced serial bus technologies, including USB and PCI Express. The new ExpressCard products will be available in two standard card sizes. Express Card 34 and Express Card 54 will both fit into a universal slot with one common connector size. Applications for the new ExpressCard products include wireless and wired communications cards, rotating and solid-state storage devices, optical and magnetic micro drives, and a variety of I/O, security, and flash memory cards.
TYCO ELECTRONICS, HARRISBURG, PA
www.expresscard.tycoelectronics.com
USB CONNECTORS
 |
The OMG-USB-232-1 and OMG-USB-485-1 USB-to-serial I/O adapters provide a single USB-to-RS-232 serial port (OMG-USB-232-1) or a single USB-to-RS-422/485/530 serial port (OMG-USB-485-1), providing USB connectivity to legacy or non-USB-compliant devices. They support standard PC data rates up to 460 and 921 kbit/s. Simply install the included software and connect the adapter to the USB port. The device is immediately recognized by the system.
OMEGA ENGINEERING, STAMFORD, CT
www.omega.com
ETHERNET JACK
 |
The HI-IMPACT jack utilizes Xcelerator technology, delivering excellent category 5e component performance. The HI-IMPACT patch cord with SpeedGain technology delivers a high-performance connection, with a mated protection level of IP67 to seal out unwanted elements. The mated connection has a bayonet-style interface constructed from a robust polymer resistant to common oils, chemicals, and cleaning agents. The HI-IMPACT system was designed to protect against extreme environmental conditions and is available in three different levels of protection: mild, harsh, and severe.
HUBBEL, STONINGTON, CT
www.hubbell-premise.com
