 |
HIGH-SPEED CONNECTORS — The micro GiGaCN high-speed, differential- connector line has added an I/O plug with thumbscrews designed for the server and storage industry, telecom applications, high-speed video and test equipment, logic analyzers, and medical instrumentation. The new FCN-260D is a copper I/O solution with differential signaling, available in 4× and 12× versions. The device is rated as AC 0.5 A for signal and AC 1 A for ground. The FCN-260D enables a scalable performance range of 500 Mbit/s to 6 Gbit/s per link. Forward crosstalk is less than 4% at 100-ps pulse rise time (four-pair switching) with 93.6- to 109.9-W impedance. FUJITSU COMPONENTS AMERICA, SUNNYVALE, CA. www.fcai.fujitsu.com
 |
HEARING-AID CONNECTOR — A multipart bridge connector for Oticon's new SUMO behind-the-ear hearing aid combines a custom metal alloy, precision metal stamping, Kapton, and a two-end connector molded encapsulant to yield an ultrasmall connector. The bridge connector seals out contaminants in harsh environmental conditions. The connector is made with Paliney 5, an alloy of palladium, silver, and copper that minimizes precious metal content and cost, yet provides the electrical performance and corrosion resistance required in demanding applications. DERINGER-NEY, BLOOMFIELD, CT, and OTICON, HELLERUP, DENMARK. www.deringerney.com/Oticon.pdf
 |
MINIATURE CIRCULAR CONNECTORS — This 12-position high-density microminiature circular connector is well suited for a catheter application. The LCP MIL-Spec quality circular connector has a Santoprene overmold and embedded electronics with a focus on size, ease of use, and reliability for medical OEMs. The connector is composed of MIL-Spec stamped BeCu compliant pins mated with seamless screw-machine sockets. Standard microminiature circular connectors without overmold are available "off-the-shelf" in three shell sizes with up to 27 positions. All are suitable for custom overmolding based on a customer's specific requirements. OMNETICS, MINNEAPOLIS, MN. www.omnetics.com
 |
MINIATURE CONNECTORS — Suitable for applications requiring reduced size and weight, these MIL-PRF-83513 approved connectors permit a variety of commercial applications including geophysical exploration, medical diagnostics, telecommunications, and industrial equipment. Microminature TwistPin connectors feature a unique low-force rugged spring pin recessed into the insert to prevent contact damage. Epoxy sealing and interfacial seals provide environmental protection. The 3-A contact system can be terminated to 24 through 30 AWG insulated wire. Liquid-crystal polymer insulators and machined aluminum connector bodies withstand up to 200°C operating temperature for demanding environments such as encountered in geophysical exploration. GLENAIR, GLENDALE, CA. www.glenair.com/micro-d/mdcots.html
 |
MODULAR CONNECTORS — A highly streamlined manufacturing process has been introduced for the N Series high-density, rack-and-panel modular connector. Standard N Series configurations are now available to customers in one week through Hypertronics-authorized distributors, and up to six weeks for larger-volume orders through Hypertronics directly. They offer longevity of up to 100,000 mating cycles, contact counts from 20 to 765 in a single connector, low insertion/extraction forces, and a half-turn quick disconnect. The N Series is ideal in automotive, medical, and military environments where failure is not an option. HYPERTRONICS, HUDSON, MA. www.hypertronics.com
 |
PLASTIC CONNECTORS — Compact size and a light and rugged design featuring a sterilizable polysulfone (PSU) shell makes these REDEL Series connectors ideal for medical instrumentation. Polyetherimide (PEI) is available for high-steam sterilization-cycle requirements. Use of nonconductive materials increases security. The REDEL Series features sizes ranging from 2 to 32 contacts and comes in reusable and disposable versions. The REDEL is available in a variety of shell styles including plugs and front-, rear-, or flange-mounted receptacles, as well as in fluidic and water-tight (IP 66) plug and receptacle models. LEMO USA, ROHNERT PARK, CA. www.lemousa.com
 |
MINIATURE COAX CONNECTORS — For DC to 3-GHz applications, miniature AYU-1 cable-to-board connectors require only 3 × 3 mm of board area with a 2-mm mated height. The SMT configuration is ideal for high-density packaging in advanced medical applications. The AYU-1 solution addresses hand-held or wireless devices. With VSWR performance under 1.3, dielectric withstanding at 150 VAC rms, and operating temp range of -20°C to +90°C, the AYU-1 connector offers the performance of large coaxial connectors in a package the size of a pencil point. Embossed tape reels afford compatibility with pick-and-place equipment. Cost-effective cable plugs are supplied as complete assemblies per customer specifications. JST CORPORATION, WAUKEGAN, IL. www.jst.com
 |
WIRING ANALYZERS — High-performance medical cables and connectors can now be tested for functionality, performance, and safety using the CableTest Horizon 1500 wiring analyzer. This technology is now being used for testing advanced medical products including implantable stimulation devices, diagnostic catheters, x-ray imaging cables, and endoscopes. In addition to standard continuity testing, the Horizon provides programmable high-current testing at 1 A, 28 VDC, HiPot testing capability up to 1500 VDC and/or 1067 VAC, and measurement accuracies of up to ±10 mW and ±4% between 50 pF and 1 mF. CABLETEST SYSTEMS, MARKHAM, ONTARIO, CANADA. www.CableTest.com
 |
EMI FILTERS — Flex-Lead low-pass EMI/RFI filters provide a means for filtering sensitive electronic circuits where space is at a premium. This filter design eliminates several installation steps while adding flexibility to any application. With its built-in, stress-relieved flexible termination, low-pass filtering can now be achieved without the added burden of attaching leads directly to the filter. These devices have numerous applications in implantable medical devices, military and commercial satellites, flight hardware, telecommunications, and other areas where EMI or RF filtering is required. PACIFIC AEROSPACE & ELECTRONICS, WENATCHEE, WA. www.pacaero.com
 |
HOSPITAL-GRADE SOCKETS — The Interpower Danish hospital-grade socket makes it easy to design medical products for use in Denmark. The Danish Hospital-Grade socket, 88010910, has DEMKO approval and is rated for 10 A at 250 VAC. Molded with thermoplastic material, the Danish hospital-grade socket is recommended for use in medical applications and specifications are being added to the standard SB 107-2-D1. The socket is designed to prevent the wrong equipment from being connected and disrupting the main circuit in specific medical settings. PANEL COMPONENTS, OSKALOOSA, IA. www.interpower.com/medical
 |
SMT CONNECTORS — The MMA SMT board-stacking connector maximizes high-speed-signal integrity and high-pin-count SMT capabilities. Supporting a system bandwidth in excess of 5 GHz, the MMA system features dual active cantilever spring contacts that deliver lower insertion/withdrawal forces without jeopardizing normal forces needed for a reliable connection. A low-insertion-force contact system and a 1.0-mm pitch allows the hermaphroditic connectors to be easily mated and unmated. Applications include medical equipment, high-end computers, routers, servers, optical transceivers, test/instrumentation, and other interconnect products. AVX, MYRTLE BEACH, SC. www.avxcorp.com
 |
POWER-ENTRY MODULES — The next-generation power-entry module line has expended with the series DC11 and DC12. The units combine an AC inlet with optional EMC filter. A rocker-style switch recessed in the unit prevents accidental actuation. The new series is the smallest of its kind, saving sapce in front and behind the panel. The in-rush rating of the switch is 100 A for 4 ms, 5 A continuous. The low bandpass filter is optimized to attenuate noise less than 1 MHz in both common and differential modes. Applications include telecom, office, household, medical equipment, industrial, and information technology. SCHURTER, SANTA ROSA, CA. www.schurter.com
